Results 1 to 14 of 14

Thread: DGTEC firmware 2011 updates available

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member CHRISS's Avatar
    Join Date
    Sep 2011
    Location
    Perth WA
    Posts
    491
    Thanks
    142
    Thanked 312 Times in 184 Posts
    Rep Power
    209
    Reputation
    2015

    Default DGTEC firmware 2011 updates available

    New updates available for service issues such as freezing and start up/ recording issues (firmware 2011) are also available from the DGTEC website.

    Please update software first before replacing hardware...


    From DGTEC Website Software Upgrades page: -


    Click on the relevant link below to download the latest software update for your DGTEC product. For further help and assistance, please access the DGTEC Call Centre via the Support page.



    Obsolete Products



    * DG-FV500PVR Upgrade (zip file 4.3Mb)

    * DG-HD6760 Upgrade (rar file 2.3Mb) Upgrade instructions DG-HD6760 (25Kb)



    New Products



    DG-HDMP1080

    DG-HDMP1080P

    DG-HDMP1080TT

    DG-HDMP500TT

    DG-DABVPR1TB

    DG-DABPVR500GB

    DG-HD2104AND



    Models

    DG-FV500PVR - 500GB HD PVR WITH TWIN TUNER (FREEVIEW)
    DG-HD6760 - HD SET TOP BOX WITH USB RECORDING
    DG-HDMP1080 - HD MEDIA PLAYER
    DG-HDMP1080P - WIRELESS HD MULTI MEDIA PLAYER / STB
    DG-HDMP1080TT - HD MEDIA PLAYER WITH TWIN TUNER
    DG-HDMP500TT - (NEW MODEL RELEASE)
    DG-DABVPR1TB - 1TB HD PVR WITH TWIN TUNER WITH INTEGRAT
    DG-DABPVR500GB / DG-DAB+500PVR- 500GB HD PVR / TWIN TUNER WITH INTEGRATED
    TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR
    GG-HD1200PVR- BAUHN UNIT WITH TWIN TUNER
    Note: - Master Override Password 1973



    Instructions:



    Read instructions carefully before commencing. Software needs to be carried out while the PVR is cold. Go to "Telefix" website and select "Service Guide" or "Download Service Manuals" and download software to a location on the PC Hard Drive.
    Unzip file and copy "usb.upg" software onto a blank USB Memory Stick.
    Plug USB Stick to USB port of PVR


    Connect Power to PVR and switch on so that that the booting process commences.
    Press 'Menu' button and scroll left or right by using the arrow buttons to find 'Installation' then press OK to select.
    Note: PVR may freeze and not allow selection. Several attempts will be required to enable selection. If problem persists, switch OFF PVR to allow it to cool down then try again or use the alternative method.

    Alternative Method



    1a. Disconnect mains power.

    2a. Plug USB Memory Stick to USB port.

    3a. Press and hold the CH down arrow button on the unit and then connect mains power.

    4a. When the display starts counting down release channel button and the upgrade interface will appear on screen.



    7. Scroll down to 'USB Menu' by using the arrow down button then press 'OK' to select.

    8. Scroll down to 'USB Upgrade' by using the arrow down button then press 'OK' to commence software update.

    · Note: - Please do not shutdown PVR or remove USB Stick during the update process. When the update is complete the PVR will power down and reboot again as normal.

    Once the update has completed, reset the PVR by restoring back to Factory Default.
    Press Menu à Installation à Factory Default à enter password 0 0 0 0 à Select 'Yes' à press OK to rescan channels.

    Check Software Version, Press Menu à Installation à Version Info à OK

  2. The Following 7 Users Say Thank You to CHRISS For This Useful Post:

    ABS ComTech (22-12-11),Auwnch (26-10-13),kranski (08-06-12),locks01 (12-05-13),OSIRUS (19-12-11),skreskajona (16-03-13),tristen (13-05-13)

  3. Look Here ->

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •