GWM 071b - Page 12

**uflca** · 08-04-08, 10:48 PM

nice one... thanks z80 for the direction

I should of been on the ball with this especially as the NW layer is my field of work. I missed the Event log entry, but I found exactly 1 entry when I just looked, which gave that warm and fuzzy feeling of satisfaction (a bit like when I look at your avatar z80).

I appologise to Mr GW for my private impure thoughts around the software coding

uflca

**nightsearch59** · 09-04-08, 10:18 PM

Quote:

Originally Posted by z80

Listen carefully.

Windows XP has a 10 user connection limit.
Greywolf has a 20 user connection limit.

What you gonna do now?

(Hint: what year was it 5 years ago?)

z80

in my book YOU ARE LEGEND!!!

**LeroyPatrol** · 10-04-08, 08:56 AM

Quote:

Originally Posted by z80

Listen carefully.

Windows XP has a 10 user connection limit.
Greywolf has a 20 user connection limit.

What you gonna do now?

(Hint: what year was it 5 years ago?)

Or maybe XP with no service packs....

Leroy

**ktm200** · 12-04-08, 08:39 PM

FYI
Today I ran my dm500s connected to next G moble phone in modem mode plugged in to my laptop. Server was gwm071b. It ran without pixelation and i didn't have a problem at all. The latency was within a bees dick of my dm7020 on the local lan. I didn't bother to calculate the cost, but it works perfectly. This is probably useless info but it works.

cheers
ktm200

**z80** · 12-04-08, 08:54 PM

Sounds pretty interesting to me mate.
congratulations on a successful config.

**kingie05** · 16-04-08, 10:37 AM

Hi Z80,

I've tried this option you've mentioned & still same issue with the connection limit. Have tried GW on a Win Server 2003 R2 & Win XP Pro SP2 (with the windows XP connection limit crack applied), with no difference at all.

Like mentioned before by another member that it will connect around 6 clients (on my server the most connections I've seen is 9 clients) & others will be at the "Ready" mode.

So I don't think it has much to do with the OS, I would say it's more to do with GW user limitation.

Is anyone still having this problem?

Cheers
Kingie05

Quote:

Originally Posted by z80

Listen carefully.

Windows XP has a 10 user connection limit.
Greywolf has a 20 user connection limit.

What you gonna do now?

(Hint: what year was it 5 years ago?)

**Johnno** · 16-04-08, 11:16 AM

Info on Vista, XP & win2003...not confirmed if it works yet.

Windows Vista tcpip.sys Connection Limit Patch for Event ID 4226 My Digital Life

**uflca** · 16-04-08, 11:20 AM

hmmm

I patched XP but did not get around to retesting GWM with over 6 users.
I have confidence in z80s reply though...

uflca

**kingie05** · 16-04-08, 11:31 AM

This only relates to Vista. Like mentioned that on Vista it's hard coded in tcpip.sys.

Quote:

Originally Posted by Johnno

Info on Vista, XP & win2003...not confirmed if it works yet.

Windows Vista tcpip.sys Connection Limit Patch for Event ID 4226 My Digital Life

**Johnno** · 16-04-08, 11:33 AM

Windows XP SP2 TCP Connection Limit (Event ID 4226) My Digital Life

**kingie05** · 16-04-08, 11:34 AM

Quote:

Originally Posted by uflca

hmmm

I patched XP but did not get around to retesting GWM with over 6 users.
I have confidence in z80s reply though...

uflca

I gave it a go last night on my Win XP Pro ( applied the patch & states that TCP Connection limit=50) & made no difference with the user limitation. Also have a Win Server 2003 with same result.

**Johnno** · 16-04-08, 11:36 AM

the best thing to do is check your 'Event Viewer' first and see if event id 4226 error shows up.

start_control panel_admin tools_event viewer_system.log

**kingie05** · 16-04-08, 11:52 AM

Quote:

Originally Posted by Johnno

the best thing to do is check your 'Event Viewer' first and see if event id 4226 error shows up.

start_control panel_admin tools_event viewer_system.log

I've just check "Event Viewer" & with no ID 4226 errors listed.

I would say that it comes down to be an issue with GW & not the OS.

**uflca** · 16-04-08, 06:05 PM

before I patched my XP install I checked event viewer and Idid find 1 instance of the event. I assumed that this was the issue so I patched XP increasing connection limit to 50 from 10 and that was that.

I have not tested yet for connections over 10 to see if it worked.
When I can I will run up a test, but will need some DMs to test it. At the moment I dont have any.

It makes sense that if XP is limiting the TCP connections to 10 then additional connections will be queue until a socket is available which is what i was experiencing when I was playing around with it.

As I could not figure out what it was until z80 enlightened me, I setup a CCcam server and used that to fed the clients from a single connection to GWM it worked fine.

PS: are you using GWM or GW?

uflca

**kingie05** · 16-04-08, 08:55 PM

Im running "GWM" on a "Win Server 2003 R2" & still not much luck. GWM will not accept more than 10 clients, with the rest of the 3 clients in Ready mode. All clients are using Cccam.

Like I said I've also tried it with Win XP Pro SP2 and had the TCP connection limits patched to a 50 limit connection & same story, no go.

I would say maybe GWM works fine with more than 10 clients if I had the non public of GWM, if there is one out there, anyone, hmmm?

Cheers

Quote:

Originally Posted by uflca

before I patched my XP install I checked event viewer and Idid find 1 instance of the event. I assumed that this was the issue so I patched XP increasing connection limit to 50 from 10 and that was that.

I have not tested yet for connections over 10 to see if it worked.
When I can I will run up a test, but will need some DMs to test it. At the moment I dont have any.

It makes sense that if XP is limiting the TCP connections to 10 then additional connections will be queue until a socket is available which is what i was experiencing when I was playing around with it.

As I could not figure out what it was until z80 enlightened me, I setup a CCcam server and used that to fed the clients from a single connection to GWM it worked fine.

PS: are you using GWM or GW?

uflca

**O-3** · 21-04-08, 09:52 PM

Gday Chaps.

Will the Midnight version work with Spongebob-serial number starting with 4008?

When connected with Greywolf it reads as "ACS V5.0"

**z80** · 22-04-08, 05:44 AM

Quote:

Originally Posted by O-3

Gday Chaps.

Will the Midnight version work with Spongebob-serial number starting with 4008?

When connected with Greywolf it reads as "ACS V5.0"

Yeah...it will work...for about 10 minutes.
Until the anti cs countermeasures kick in.
Then all have to be on the same channel....

**O-3** · 22-04-08, 01:25 PM

Thanks Z.

I was unsure if it was a V5 because of the serial number.

**STI02** · 22-04-08, 07:42 PM

Hi z80

Can GWM read an NDS card?

cheers

Quote:

Originally Posted by z80

Yeah...it will work...for about 10 minutes.
Until the anti cs countermeasures kick in.
Then all have to be on the same channel....

**gw1** · 22-04-08, 08:13 PM

No, it's Irdeto only.

12-04-08, 08:54 PM	#225 (permalink)
z80 Master Raffler iTrader: (37) Join Date: Jan 2008 Posts: 2,741 Spent time on board: 9:02:14	Sounds pretty interesting to me mate. congratulations on a successful config. __________________ Want to support the site and maybe win a $700 HD monitor on 31/7/08 ? . http://www.austech.info/general-chat...1920x1200.html

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/technical-development/1122-gwm-071b.html
Posted By	For	Type	Date
jaycar newcs \| Topic profile \| BoardReader	This thread	Refback	06-04-08 09:14 AM
greywolf midnight :: BoardReader	This thread	Refback	01-04-08 08:33 PM
"Greywolf" - topic profile :: BoardReader	This thread	Refback	31-03-08 10:02 PM
Technical and Development [Archive] - Austech	This thread	Refback	30-03-08 03:48 PM
"austar gamma" - topic profile :: BoardReader	This thread	Refback	28-03-08 08:56 PM
"Jaycar" - topic profile :: BoardReader	This thread	Refback	18-03-08 06:59 PM
MAX232 :: BoardReader	This thread	Refback	14-03-08 08:26 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-03-08 01:22 AM
"CCCAM 2 02" - topic profile :: BoardReader	This thread	Refback	10-03-08 12:01 AM
"Technical and Development" - forum profile :: BoardReader	This thread	Refback	02-03-08 06:25 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-02-08 12:40 AM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	12-02-08 08:19 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	08-02-08 10:02 PM
"Card sharing" - topic profile :: BoardReader	This thread	Refback	01-02-08 11:05 AM
Austech - Powered by vBulletin	This thread	Refback	27-01-08 10:29 AM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-04-08, 10:48 PM	#221 (permalink)
uflca Premium Member iTrader: (0) Join Date: Apr 2008 Posts: 48 Spent time on board: -	nice one... thanks z80 for the direction I should of been on the ball with this especially as the NW layer is my field of work. I missed the Event log entry, but I found exactly 1 entry when I just looked, which gave that warm and fuzzy feeling of satisfaction (a bit like when I look at your avatar z80). I appologise to Mr GW for my private impure thoughts around the software coding uflca

12-04-08, 08:39 PM	#224 (permalink)
ktm200 Premium Member iTrader: (3) Join Date: Jan 2008 Posts: 48 Spent time on board: 0:15:25	FYI Today I ran my dm500s connected to next G moble phone in modem mode plugged in to my laptop. Server was gwm071b. It ran without pixelation and i didn't have a problem at all. The latency was within a bees dick of my dm7020 on the local lan. I didn't bother to calculate the cost, but it works perfectly. This is probably useless info but it works. cheers ktm200

16-04-08, 11:16 AM	#227 (permalink)
Johnno Member iTrader: (0) Join Date: Jan 2008 Posts: 62 Spent time on board: -	Info on Vista, XP & win2003...not confirmed if it works yet. Windows Vista tcpip.sys Connection Limit Patch for Event ID 4226 My Digital Life

16-04-08, 11:20 AM	#228 (permalink)
uflca Premium Member iTrader: (0) Join Date: Apr 2008 Posts: 48 Spent time on board: -	hmmm I patched XP but did not get around to retesting GWM with over 6 users. I have confidence in z80s reply though... uflca

16-04-08, 11:33 AM	#230 (permalink)
Johnno Member iTrader: (0) Join Date: Jan 2008 Posts: 62 Spent time on board: -	Windows XP SP2 TCP Connection Limit (Event ID 4226) My Digital Life

16-04-08, 11:36 AM	#232 (permalink)
Johnno Member iTrader: (0) Join Date: Jan 2008 Posts: 62 Spent time on board: -	the best thing to do is check your 'Event Viewer' first and see if event id 4226 error shows up. start_control panel_admin tools_event viewer_system.log

16-04-08, 06:05 PM	#234 (permalink)
uflca Premium Member iTrader: (0) Join Date: Apr 2008 Posts: 48 Spent time on board: -	before I patched my XP install I checked event viewer and Idid find 1 instance of the event. I assumed that this was the issue so I patched XP increasing connection limit to 50 from 10 and that was that. I have not tested yet for connections over 10 to see if it worked. When I can I will run up a test, but will need some DMs to test it. At the moment I dont have any. It makes sense that if XP is limiting the TCP connections to 10 then additional connections will be queue until a socket is available which is what i was experiencing when I was playing around with it. As I could not figure out what it was until z80 enlightened me, I setup a CCcam server and used that to fed the clients from a single connection to GWM it worked fine. PS: are you using GWM or GW? uflca

21-04-08, 09:52 PM	#236 (permalink)
O-3 Premium Member iTrader: (0) Join Date: Apr 2008 Posts: 6 Spent time on board: -	Gday Chaps. Will the Midnight version work with Spongebob-serial number starting with 4008? When connected with Greywolf it reads as "ACS V5.0"

22-04-08, 01:25 PM	#238 (permalink)
O-3 Premium Member iTrader: (0) Join Date: Apr 2008 Posts: 6 Spent time on board: -	Thanks Z. I was unsure if it was a V5 because of the serial number.

22-04-08, 08:13 PM	#240 (permalink)
gw1 Member iTrader: (1) Join Date: Jan 2008 Location: Hobart Posts: 35 Spent time on board: -	No, it's Irdeto only.

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links