GWM 071b - Page 5

**RHCP** · 15-02-08, 03:10 PM

Quote:

Originally Posted by Barneyboy

will this now enable us to cs a v5 epsilon without a dreambox?
Thanks Barneyboy

Wait, sorry to interrupt, you can share a v5 card (with the anti-cs countermeasures) using a dreambox??

Cheers, RHCP.

**z80** · 16-02-08, 01:59 AM

I doubt it.

**craig** · 16-02-08, 05:28 PM

Hi there

I am a long time reader, first time poster

I am having trouble getting IRD1 emu to work with greywolf

I have entered HMK,PMK,provID,ASN,HSN and COCO which I assumed to be AUS, AUTOSTART is ticked. The details are valid as they work fine with CCcam 2.0.1

After I have saved this and start greywolf, when I come back to this setup the provID,COCO,ASN,HSN have changed or been deleted out.

Thanks in advance for any help

Other than that everything else works great with no problems.

**conan_oz** · 16-02-08, 05:45 PM

Quote:

Originally Posted by z80

I doubt it.

Maybe they do again, I've just seen one running for over two hours that never use to work, maybe the countermeasures have been turned off with the release of the mystar boxes???

Can some of you guys try your cards to comfirm.

**diavalo13666** · 16-02-08, 05:51 PM

Quote:

Originally Posted by craig

Hi there

I am a long time reader, first time poster

I am having trouble getting IRD1 emu to work with greywolf

I have entered HMK,PMK,provID,ASN,HSN and COCO which I assumed to be AUS, AUTOSTART is ticked. The details are valid as they work fine with CCcam 2.0.1

After I have saved this and start greywolf, when I come back to this setup the provID,COCO,ASN,HSN have changed or been deleted out.

Thanks in advance for any help

Other than that everything else works great with no problems.

You wont get the IRD1 emulation working as it was not completely finished by the looks of it in this release

**craig** · 16-02-08, 05:56 PM

Quote:

Originally Posted by diavalo13666

You wont get the IRD1 emulation working as it was not completely finished by the looks of it in this release

Cheers for that, I won't waste any more time on it then, I'll throw another card reader on and chuck my card in it.

**Luck Duck** · 17-02-08, 02:17 PM

Quote:

Originally Posted by sparkd

for those that dont want to go through all the Prime... sites registration process etc the same file can be located on SI

I tried Rapidshare it's been deleted by uploader where is SI??

**Luck Duck** · 17-02-08, 02:29 PM

Quote:

Originally Posted by Luck Duck

I tried Rapidshare it's been deleted by uploader where is SI??

It's ok I got it.

Luck Duck

**z80** · 17-02-08, 07:58 PM

Quote:

Originally Posted by diavalo13666

You wont get the IRD1 emulation working as it was not completely finished by the looks of it in this release

It can be made to work, and I have it running here.

But can't help you cause it needs keys and that is against site rules.

Just keep perservering, youi actually need to be very experienced to setup the aurora emu, just one thing wrong and black screen.

**vnboost** · 17-02-08, 08:05 PM

Quote:

Originally Posted by z80

It can be made to work, and I have it running here.

But can't help you cause it needs keys and that is against site rules.

Just keep perservering, youi actually need to be very experienced to setup the aurora emu, just one thing wrong and black screen.

How about a small tutorial without keys

**malrose** · 17-02-08, 08:22 PM

Ok. Im new to tihs cs stuff and get alot of differnet answers to my request.

If I have 2 hum boxs, One with a season and valid card (Server). Does the client hum box need any card inserted? Just experimenting with a local home network. Have not got bfXXX connection on any box. Just com-tcip software running. Dont want to go out and spen money untill i can get this home network thing going...

**jamie_s** · 17-02-08, 08:41 PM

z80, i did send you an email last week - is there any indication when tcp client connectivity will be implemented?

**z80** · 17-02-08, 09:49 PM

Quote:

Originally Posted by jamie_s

z80, i did send you an email last week - is there any indication when tcp client connectivity will be implemented?

I have no idea mate, I reckon the author has disappeared, as they do.

**Decapper** · 18-02-08, 10:42 AM

It seems everything works under win98se of this version expect the serial side of things. I can only hope that the author can be so kindly and maybe implant this in the next release if any. Besides that the program is rock solid and its a shame he does not have a hand in the writting of newcs

**Johnno** · 18-02-08, 11:15 AM

With the Ird1 emulation, the best thing to do is to run 2 sepperate GWM apps..
One for your subcard and the other for the aurora emu.
just set the newcs ports differently and bobs your uncle.

**z80** · 18-02-08, 12:22 PM

Quote:

Originally Posted by Johnno

With the Ird1 emulation, the best thing to do is to run 2 sepperate GWM apps..
One for your subcard and the other for the aurora emu.
just set the newcs ports differently and bobs your uncle.

That works really well, thanks Johnno.

**RSA** · 18-02-08, 02:26 PM

Quote:

Originally Posted by Johnno

With the Ird1 emulation, the best thing to do is to run 2 sepperate GWM apps..
One for your subcard and the other for the aurora emu.
just set the newcs ports differently and bobs your uncle.

but the BFxx doesn't switch

**z80** · 18-02-08, 02:53 PM

Quote:

Originally Posted by RSA

but the BFxx doesn't switch

But two bfxx's with 2 seasons and two cams switches fine.

Of course with the right humax firmware it will switch between the bf and a CI cam with a goldie in it.

**RSA** · 18-02-08, 03:42 PM

Quote:

Originally Posted by z80

But two bfxx's with 2 seasons and two cams switches fine.

Of course with the right humax firmware it will switch between the bf and a CI cam with a goldie in it.

Yes having a TT BFXX mod and a CI with aurora works no problems on a 5400 but the 5410 does not have a CI hmmmmmmm

**z80** · 18-02-08, 04:34 PM

No problem !!!

Just get TWO 5400 CI boxes.....

Probably same price as a CI cam anyway....

16-02-08, 05:28 PM	#83 (permalink)
craig Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 3 Spent time on board: 6:04:37	Irdeteo1 emu Hi there I am a long time reader, first time poster I am having trouble getting IRD1 emu to work with greywolf I have entered HMK,PMK,provID,ASN,HSN and COCO which I assumed to be AUS, AUTOSTART is ticked. The details are valid as they work fine with CCcam 2.0.1 After I have saved this and start greywolf, when I come back to this setup the provID,COCO,ASN,HSN have changed or been deleted out. Thanks in advance for any help Other than that everything else works great with no problems.

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/technical-development/1122-gwm-071b.html
Posted By	For	Type	Date
jaycar newcs \| Topic profile \| BoardReader	This thread	Refback	06-04-08 09:14 AM
greywolf midnight :: BoardReader	This thread	Refback	01-04-08 08:33 PM
"Greywolf" - topic profile :: BoardReader	This thread	Refback	31-03-08 10:02 PM
Technical and Development [Archive] - Austech	This thread	Refback	30-03-08 03:48 PM
"austar gamma" - topic profile :: BoardReader	This thread	Refback	28-03-08 08:56 PM
"Jaycar" - topic profile :: BoardReader	This thread	Refback	18-03-08 06:59 PM
MAX232 :: BoardReader	This thread	Refback	14-03-08 08:26 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-03-08 01:22 AM
"CCCAM 2 02" - topic profile :: BoardReader	This thread	Refback	10-03-08 12:01 AM
"Technical and Development" - forum profile :: BoardReader	This thread	Refback	02-03-08 06:25 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-02-08 12:40 AM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	12-02-08 08:19 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	08-02-08 10:02 PM
"Card sharing" - topic profile :: BoardReader	This thread	Refback	01-02-08 11:05 AM
Austech - Powered by vBulletin	This thread	Refback	27-01-08 10:29 AM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16-02-08, 01:59 AM	#82 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:12:48	I doubt it.

17-02-08, 08:22 PM	#91 (permalink)
malrose Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 26 Spent time on board: 1 Day and 23:42:01	Ok. Im new to tihs cs stuff and get alot of differnet answers to my request. If I have 2 hum boxs, One with a season and valid card (Server). Does the client hum box need any card inserted? Just experimenting with a local home network. Have not got bfXXX connection on any box. Just com-tcip software running. Dont want to go out and spen money untill i can get this home network thing going...

17-02-08, 08:41 PM	#92 (permalink)
jamie_s Junior Member iTrader: (0) Join Date: Jan 2008 Posts: 3 Spent time on board: 0:12:34	z80, i did send you an email last week - is there any indication when tcp client connectivity will be implemented?

18-02-08, 10:42 AM	#94 (permalink)
Decapper Two bricks iTrader: (2) Join Date: Jan 2008 Location: Your mothers house Posts: 553 Spent time on board: 1 Day and 14:52:57	It seems everything works under win98se of this version expect the serial side of things. I can only hope that the author can be so kindly and maybe implant this in the next release if any. Besides that the program is rock solid and its a shame he does not have a hand in the writting of newcs

18-02-08, 11:15 AM	#95 (permalink)
Johnno Member iTrader: (0) Join Date: Jan 2008 Posts: 62 Spent time on board: 0:07:12	With the Ird1 emulation, the best thing to do is to run 2 sepperate GWM apps.. One for your subcard and the other for the aurora emu. just set the newcs ports differently and bobs your uncle.

18-02-08, 04:34 PM	#100 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:12:48	No problem !!! Just get TWO 5400 CI boxes..... Probably same price as a CI cam anyway....

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links