GWM 071b - Page 8

**ingxen** · 25-03-08, 01:49 AM

austar private gamma (sellers) aka whitey

**Calais24** · 28-03-08, 04:17 PM

A quick problem guys that i have seen with GW
Scenario:
White Card on GW 017b via Jaycar II with all the usual mods
Bare install of XP SP2
5 Dreams connected via LAN/WAN
Running CCcam mainly plus one on MgCamd

Greywolf runs prefectly for a day or so, ECM/EMM Cache on - no pixellation on any DB - initially problems begin after 24hrs or so with the initial symptom being only one user getting ECM/EMMs and the rest unable to get pics...

Then after another 24hrs or so the one and only user getting pics will lose ECM/EMMs and GW comes to a halt - this is only fixed by closing the program and restarting it

then all is fine for 24hours

anyone else had similar issues? besides this it has outperformed newcs very well

**z80** · 29-03-08, 12:43 AM

mine has 2 million emms and still going strong.

all ms updates done, but running win2003 enterprise server.

**CVLAIS** · 30-03-08, 02:04 AM

Quote:

Originally Posted by fandtm666

if you are using tiny xp you have to get all the network system stuff installed as well which is removed in the effort to shrink it.

i can say that doing this running

beast on a p3 1 gig dell c610 with 256 meg ram

3 internal dreams

2 external dreams

1 internal hummy with bf430

1 external hummy with bf430

500 gig external hdd for the dream recording and share

i reboot it once a week and that the only time i look at it

what and how did you have to reinstall to get greywolf working on tinyxp beast edition.

Thanks
CVLAIS

**malrose** · 30-03-08, 11:43 AM

Can the infinity USB unlimited programer be used insted of jaycar programer.

Just wondering if it will fix lantency issues. Getting 150ms average serving 2 humboxs.

Cheers.
Mal..

**z80** · 30-03-08, 04:00 PM

150ms? LMAO...that is nothing to complain about.

since it is the total turnaround time for a serial device.

**malrose** · 30-03-08, 04:14 PM

So what are the possible reasons picture drops out every half hour or so for 5-10 seconds?

Mal..

**z80** · 30-03-08, 09:36 PM

there are many reasons, mostly torrent downloads by teenagers.
background programs fire up, power save on a pc...the list goes on and on.

**ingxen** · 01-04-08, 02:12 AM

It was something I was doing, When you first start up Greywolf without a .ini file and setup everything i have found I need to close greywolf then load it up again and then I dont need to run it in windows 2000 compatibility mode to get all the card details populated on the main screen. If you start it without closing and starting it doesnt work.

**ktm200** · 01-04-08, 08:41 PM

Do whiteys update with Cccam 2.0 and the latest version of GW

**STI02** · 01-04-08, 09:51 PM

Hi z80

Do you have anything else in your CCcam.cfg other than the N: line ?
Also do you let all the clients update the card or just one ?

Cheers

Quote:

Originally Posted by z80

mine has 2 million emms and still going strong.

all ms updates done, but running win2003 enterprise server.

**z80** · 01-04-08, 10:37 PM

Just the N: line.......well, several "N" lines...

If I did have a server and wanted to play with it, the clients would just drop down to the next one.

I would only let the clients on my local lan do updates...
I hear that speeds things up a bit.

**STI02** · 01-04-08, 11:46 PM

Thanks m8 that answers my question

Quote:

Originally Posted by z80

Just the N: line.......well, several "N" lines...

If I did have a server and wanted to play with it, the clients would just drop down to the next one.

I would only let the clients on my local lan do updates...
I hear that speeds things up a bit.

**warez_kid** · 02-04-08, 11:46 PM

Quote:

Originally Posted by z80

.

all ms updates done, but running win2003 enterprise server.

that seems to be the solution i found to alot of the issues i had mentioned in this thread by other members.

**STI02** · 02-04-08, 11:50 PM

Did you go from XP to Win2003 ? STD or Enterprise ?

Quote:

Originally Posted by warez_kid

that seems to be the solution i found to alot of the issues i had mentioned in this thread by other members.

**warez_kid** · 03-04-08, 02:38 PM

xp to vista enterprise

**sdrambo** · 03-04-08, 08:56 PM

Are there any tutorials for this technology? Google is not very helpful. Thanks

**z80** · 04-04-08, 12:18 AM

Quote:

Originally Posted by sdrambo

Are there any tutorials for this technology? Google is not very helpful. Thanks

The author decided that it is not necessary.

have a go and you will see that it is very basic.

**STI02** · 04-04-08, 11:33 PM

z80
When u speak with Mr GreyWolf next, can you ask him if he could kindly make the IP address colum width adjustable in the next release?

Hopefully it's not too much work for him.

Thanks in advance

Quote:

Originally Posted by z80

The author decided that it is not necessary.

have a go and you will see that it is very basic.

**z80** · 05-04-08, 12:08 PM

Quote:

Originally Posted by STI02

z80
When u speak with Mr GreyWolf next, can you ask him if he could kindly make the IP address colum width adjustable in the next release?

Hopefully it's not too much work for him.

Thanks in advance

He is reading this thread often, so I am sure he has heard you.

01-04-08, 08:41 PM	#150 (permalink)
ktm200 Premium Member iTrader: (3) Join Date: Jan 2008 Posts: 51 Spent time on board: 15:39:35	Do whiteys update with Cccam 2.0 and the latest version of GW Last edited by ktm200 : 01-04-08 at 10:06 PM. Reason: more detail

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/technical-development/1122-gwm-071b.html
Posted By	For	Type	Date
jaycar newcs \| Topic profile \| BoardReader	This thread	Refback	06-04-08 09:14 AM
greywolf midnight :: BoardReader	This thread	Refback	01-04-08 08:33 PM
"Greywolf" - topic profile :: BoardReader	This thread	Refback	31-03-08 10:02 PM
Technical and Development [Archive] - Austech	This thread	Refback	30-03-08 03:48 PM
"austar gamma" - topic profile :: BoardReader	This thread	Refback	28-03-08 08:56 PM
"Jaycar" - topic profile :: BoardReader	This thread	Refback	18-03-08 06:59 PM
MAX232 :: BoardReader	This thread	Refback	14-03-08 08:26 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-03-08 01:22 AM
"CCCAM 2 02" - topic profile :: BoardReader	This thread	Refback	10-03-08 12:01 AM
"Technical and Development" - forum profile :: BoardReader	This thread	Refback	02-03-08 06:25 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-02-08 12:40 AM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	12-02-08 08:19 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	08-02-08 10:02 PM
"Card sharing" - topic profile :: BoardReader	This thread	Refback	01-02-08 11:05 AM
Austech - Powered by vBulletin	This thread	Refback	27-01-08 10:29 AM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25-03-08, 01:49 AM	#141 (permalink)
ingxen Premium Member iTrader: (2) Join Date: Jan 2008 Location: Brisbane QLD Posts: 141 Spent time on board: 3 Days and 16:11:19	austar private gamma (sellers) aka whitey

28-03-08, 04:17 PM	#142 (permalink)
Calais24 Junior Member iTrader: (0) Join Date: Mar 2008 Posts: 13 Spent time on board: 5:23:56	A quick problem guys that i have seen with GW Scenario: White Card on GW 017b via Jaycar II with all the usual mods Bare install of XP SP2 5 Dreams connected via LAN/WAN Running CCcam mainly plus one on MgCamd Greywolf runs prefectly for a day or so, ECM/EMM Cache on - no pixellation on any DB - initially problems begin after 24hrs or so with the initial symptom being only one user getting ECM/EMMs and the rest unable to get pics... Then after another 24hrs or so the one and only user getting pics will lose ECM/EMMs and GW comes to a halt - this is only fixed by closing the program and restarting it then all is fine for 24hours anyone else had similar issues? besides this it has outperformed newcs very well

29-03-08, 12:43 AM	#143 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:06:07	mine has 2 million emms and still going strong. all ms updates done, but running win2003 enterprise server.

30-03-08, 11:43 AM	#145 (permalink)
malrose Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 26 Spent time on board: 1 Day and 23:42:01	Can the infinity USB unlimited programer be used insted of jaycar programer. Just wondering if it will fix lantency issues. Getting 150ms average serving 2 humboxs. Cheers. Mal..

30-03-08, 04:00 PM	#146 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:06:07	150ms? LMAO...that is nothing to complain about. since it is the total turnaround time for a serial device.

30-03-08, 04:14 PM	#147 (permalink)
malrose Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 26 Spent time on board: 1 Day and 23:42:01	So what are the possible reasons picture drops out every half hour or so for 5-10 seconds? Mal..

30-03-08, 09:36 PM	#148 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:06:07	there are many reasons, mostly torrent downloads by teenagers. background programs fire up, power save on a pc...the list goes on and on.

01-04-08, 02:12 AM	#149 (permalink)
ingxen Premium Member iTrader: (2) Join Date: Jan 2008 Location: Brisbane QLD Posts: 141 Spent time on board: 3 Days and 16:11:19	It was something I was doing, When you first start up Greywolf without a .ini file and setup everything i have found I need to close greywolf then load it up again and then I dont need to run it in windows 2000 compatibility mode to get all the card details populated on the main screen. If you start it without closing and starting it doesnt work.

01-04-08, 10:37 PM	#152 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:06:07	Just the N: line.......well, several "N" lines... If I did have a server and wanted to play with it, the clients would just drop down to the next one. I would only let the clients on my local lan do updates... I hear that speeds things up a bit.

03-04-08, 02:38 PM	#156 (permalink)
warez_kid Member iTrader: (0) Join Date: Jan 2008 Posts: 40 Spent time on board: 0:31:09	xp to vista enterprise

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links

03-04-08, 08:56 PM	#157 (permalink)
sdrambo Premium Member iTrader: (0) Join Date: Jan 2008 Location: Sunshine Coast Australia Posts: 53 Spent time on board: 13:21:56	Are there any tutorials for this technology? Google is not very helpful. Thanks