GWM 071b - Page 9

**Hillsbysa** · 05-04-08, 02:34 PM

Can someone post an Idiot's guide to setting up Grey Wolf for CS ?

**z80** · 05-04-08, 06:34 PM

Quote:

Originally Posted by Hillsbysa

Can someone post an Idiot's guide to setting up Grey Wolf for CS ?

How about you do it?

I'll talk you through getting it up and running and you type up a tute for all?

get the following in front of you....

A dreambox, a jaycar mk2 phoenix reader, a gamma card, a straight through 9 pin serial cable with all pins connected and a male at one end and a female at the other.

Lets do it properly....get a Humax, a BF430 and a season card as well.

Let me know when all are on the bench and i'll take it to the next stage for you.

**STI02** · 05-04-08, 07:21 PM

and a PC with a serial port running Win XP or Win 2003 Server

Quote:

Originally Posted by z80

How about you do it?

I'll talk you through getting it up and running and you type up a tute for all?

get the following in front of you....

A dreambox, a jaycar mk2 phoenix reader, a gamma card, a straight through 9 pin serial cable with all pins connected and a male at one end and a female at the other.

Lets do it properly....get a Humax, a BF430 and a season card as well.

Let me know when all are on the bench and i'll take it to the next stage for you.

**Hillsbysa** · 05-04-08, 08:32 PM

Quote:

Originally Posted by z80

How about you do it?

I'll talk you through getting it up and running and you type up a tute for all?

OK, you got a deal m8.

Let's leave the BF430 and season card for Stage 2 (on my shopping list). Everything else ready to run; GW installed on the Win XP PC...

**fandtm666** · 05-04-08, 08:40 PM

if you are only connecting a dream to GWM what tutt would you need

dam

1; set card
2: set client
3: open port on your router used by newcamd
4: set details in cccam.cfg

GWM would have to be the most simple tool available and what i consider the best and to need a tutt to use it simply means you want spoon feeding because the author has designed it to be as simple as possible.

now when you start to use real com equipment like the bf430's and making your own internal seasons and humax mods then ask for tutt's because then you are actually doing something that will take more than 2 minutes to setup as it was initially designed for this type of setup not dreams

**BillyGoat** · 05-04-08, 09:48 PM

Dont forget the FlyBuys card, you'll need that in the humax slot!

**Hillsbysa** · 05-04-08, 10:17 PM

Quote:

Originally Posted by fandtm666

if you are only connecting a dream to GWM what tutt would you need

dam

1; set card
2: set client
3: open port on your router used by newcamd
4: set details in cccam.cfg

As they say, the devil's in the detail, which (when you already know how to do it) is easily overlooked.

Plug the phoenix into the DB or PC serial (or either) ?

1. set card - how, where ?
2. set client - how, where ?
3. open port on router used by newcamd
ok, so newcamd needs to be installed and running on the DB, or can you use CCcam or others ?
1999 seems to be the default port in GW - need to change port on newcamd to suit ? Where do I do that ?
4. set details in CCcam.cfg - presumably these are the lines beginning with N: that are already described in other threads, right ?

There seems to be a few other steps - like Server - Start cards, start clients.
If the phoenix is plugged into the PC and I have a LAN running, how does the DB know where to find the Phoenix - some more settings somewhere ?

Well, I did call it an idiot's guide...

**BillyGoat** · 05-04-08, 10:40 PM

Plug the Phoenix to the pc serial.

**fandtm666** · 05-04-08, 11:42 PM

Idiot_s_guide_for_GWM

**warez_kid** · 06-04-08, 12:08 AM

top stuff 666

**Hillsbysa** · 06-04-08, 08:53 AM

Quote:

Originally Posted by fandtm666

Idiot_s_guide_for_GWM

Outstanding effort fandtm666, great community service

**fandtm666** · 06-04-08, 09:00 AM

Quote:

Originally Posted by Hillsbysa

didn't think you had it in you

piss offf

**BillyGoat** · 06-04-08, 09:42 AM

Thanks Fandtm666.
Havnt looked at it yet, but most welcomed even though some dont show it.
Rude pricks.

**Hillsbysa** · 06-04-08, 09:53 AM

Supposed to be a compliment, but as you can see you were too quick off the mark.

**BillyGoat** · 06-04-08, 12:36 PM

Lol premature remarks.

**z80** · 06-04-08, 06:10 PM

It's a shame bad attitudes and abuse clog up technical threads.

**Hillsbysa** · 06-04-08, 08:39 PM

Edited

**z80** · 06-04-08, 08:46 PM

Quote:

Originally Posted by Hillsbysa

Yeh, right. 'Piss off' is not exactly friendly, but his efforts were nevertheless appreciated.

well you've just wasted more bandwidth with that comment.

**Sanity** · 06-04-08, 08:49 PM

get on topic guys , I have never seen so much crap about nothing.

**Hillsbysa** · 07-04-08, 01:42 PM

Looks like my upgrade to Windows Vista Premium may be untimely. I take it that GWM will not work with that operating system, and the program writer has left.

06-04-08, 08:39 PM	#177 (permalink)
Hillsbysa Premium Member iTrader: (4) Join Date: Feb 2008 Location: NSW Posts: 340 Spent time on board: 5 Days and 16:17:19	Edited Last edited by Hillsbysa : 06-04-08 at 09:45 PM.

LinkBacks (?) LinkBack to this Thread: http://www.austech.info/technical-development/1122-gwm-071b.html
Posted By	For	Type	Date
jaycar newcs \| Topic profile \| BoardReader	This thread	Refback	06-04-08 09:14 AM
greywolf midnight :: BoardReader	This thread	Refback	01-04-08 08:33 PM
"Greywolf" - topic profile :: BoardReader	This thread	Refback	31-03-08 10:02 PM
Technical and Development [Archive] - Austech	This thread	Refback	30-03-08 03:48 PM
"austar gamma" - topic profile :: BoardReader	This thread	Refback	28-03-08 08:56 PM
"Jaycar" - topic profile :: BoardReader	This thread	Refback	18-03-08 06:59 PM
MAX232 :: BoardReader	This thread	Refback	14-03-08 08:26 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-03-08 01:22 AM
"CCCAM 2 02" - topic profile :: BoardReader	This thread	Refback	10-03-08 12:01 AM
"Technical and Development" - forum profile :: BoardReader	This thread	Refback	02-03-08 06:25 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	13-02-08 12:40 AM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	12-02-08 08:19 PM
"GWM 071b" - thread profile :: BoardReader	This thread	Refback	08-02-08 10:02 PM
"Card sharing" - topic profile :: BoardReader	This thread	Refback	01-02-08 11:05 AM
Austech - Powered by vBulletin	This thread	Refback	27-01-08 10:29 AM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-04-08, 02:34 PM	#161 (permalink)
Hillsbysa Premium Member iTrader: (4) Join Date: Feb 2008 Location: NSW Posts: 340 Spent time on board: 5 Days and 16:17:19	Can someone post an Idiot's guide to setting up Grey Wolf for CS ?

05-04-08, 08:40 PM	#165 (permalink)
fandtm666 Premium Member iTrader: (18) Join Date: Jan 2008 Posts: 1,085	if you are only connecting a dream to GWM what tutt would you need dam 1; set card 2: set client 3: open port on your router used by newcamd 4: set details in cccam.cfg GWM would have to be the most simple tool available and what i consider the best and to need a tutt to use it simply means you want spoon feeding because the author has designed it to be as simple as possible. now when you start to use real com equipment like the bf430's and making your own internal seasons and humax mods then ask for tutt's because then you are actually doing something that will take more than 2 minutes to setup as it was initially designed for this type of setup not dreams

05-04-08, 09:48 PM	#166 (permalink)
BillyGoat Senior Member iTrader: (2) Join Date: Jan 2008 Posts: 600 Spent time on board: 1 Week, 6 Days and 18:35:35	Dont forget the FlyBuys card, you'll need that in the humax slot!

05-04-08, 10:40 PM	#168 (permalink)
BillyGoat Senior Member iTrader: (2) Join Date: Jan 2008 Posts: 600 Spent time on board: 1 Week, 6 Days and 18:35:35	Plug the Phoenix to the pc serial.

05-04-08, 11:42 PM	#169 (permalink)
fandtm666 Premium Member iTrader: (18) Join Date: Jan 2008 Posts: 1,085	Idiot_s_guide_for_GWM

06-04-08, 12:08 AM	#170 (permalink)
warez_kid Member iTrader: (0) Join Date: Jan 2008 Posts: 40 Spent time on board: 0:31:09	top stuff 666

06-04-08, 09:42 AM	#173 (permalink)
BillyGoat Senior Member iTrader: (2) Join Date: Jan 2008 Posts: 600 Spent time on board: 1 Week, 6 Days and 18:35:35	Thanks Fandtm666. Havnt looked at it yet, but most welcomed even though some dont show it. Rude pricks.

06-04-08, 09:53 AM	#174 (permalink)
Hillsbysa Premium Member iTrader: (4) Join Date: Feb 2008 Location: NSW Posts: 340 Spent time on board: 5 Days and 16:17:19	Supposed to be a compliment, but as you can see you were too quick off the mark.

06-04-08, 12:36 PM	#175 (permalink)
BillyGoat Senior Member iTrader: (2) Join Date: Jan 2008 Posts: 600 Spent time on board: 1 Week, 6 Days and 18:35:35	Lol premature remarks.

06-04-08, 06:10 PM	#176 (permalink)
z80 Premium Member iTrader: (42) Join Date: Jan 2008 Posts: 3,667 Spent time on board: 1 Week, 3 Days and 5:06:45	It's a shame bad attitudes and abuse clog up technical threads.

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links

06-04-08, 08:49 PM	#179 (permalink)
Sanity Super Moderator iTrader: (5) Join Date: Jan 2008 Location: Victoria Posts: 2,457	get on topic guys , I have never seen so much crap about nothing.

07-04-08, 01:42 PM	#180 (permalink)
Hillsbysa Premium Member iTrader: (4) Join Date: Feb 2008 Location: NSW Posts: 340 Spent time on board: 5 Days and 16:17:19	Looks like my upgrade to Windows Vista Premium may be untimely. I take it that GWM will not work with that operating system, and the program writer has left.