mborkp

Hi,
on newcs 1.62:

Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ EMM Cache ] Initialising dynamic Cache
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ ECM Cache ] Initialising dynamic Cache
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Loader ] Starting Telnet on port 3001
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ SockSrv ] Server thread started
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Loader ] Reader type 2 on node /dev/ttyS0
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Opening device /dev/ttyS0
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Setting Parity to: ODD
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Setting Baud to custom 16129
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Read on fd 5 (len=21 timeout=5300ms)
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ ATR ] T=0 1etu=62.00us Guardtime:14etu WWT:14400etu
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ ATR ] Historical bytes: A [B0] [03] i [FF] J P [F0] [80] [00] F D [03]
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Loader ] Init NDS card
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Setting Parity to: ODD
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Setting Baud to custom 16129
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Write on fd 5 (len=5)
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Read on fd 5 (len=5 timeout=1393ms)
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Echo mismatch
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Read on fd 5 (len=1 timeout=800ms)
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ Serial ] Read timeout (0 of 1)
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ NDS ] Could not get P3
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ NDS ] i/o error ?
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed

Would be a 6MHz something to do with it?

Cheers

mborkp

Hi,
got the card recognised at 3.57MHz but still no joy.

Cheers

davo

if this is an orange card forget it if its a blue mate theres heaps of examples around its nothing special to set up.

mborkp

Hi Davo,

it is orange. I did sort that out thou )))))))
Runs on Newcs 1.62 like a charm! Be some more optymistic

Cheers

z80

glad you sorted it out, well done .

Zepic

Does your orange get updates?

I've got an orange working (well got it detected) in newcs 1.62, but I can't get it to kick start in Newcs, I've tried Mgcamd 1.31, evocamd 2.17b, various cccam versions and always getting bad ecm's.

Any ideas?

Thanks

mborkp

Hi,
yes mate it is getting updated. Never had to take it out.
Try 3.57 MHz, different reader maybe?

Cheers