|
|
| |||||||
| Technical and Development All technical development discussion in regard to DVB-S , firmware etc etc. |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
18-11-08, 08:51 PM
| #1 (permalink) |
| I'am Not a Bloody Joke   iTrader: (10) Join Date: Jan 2008 Location: Australia
Posts: 2,948
Spent time on board: 2 Months, 2 Weeks, 3 Days and 11:09:46
 |  BF Unit Help!!!!!!!!!! Mate has a setup of Telstra internet Speedtouch modem to a Lynksys router (without voip) to the BF unit to a season Can any one run through the settings for this so a dumbarse like my self could try and talk him through it LOL As there are a awful lot of the same settings on each of the above units LOL such as portforward ,dmz etc cheers
__________________ Please wipe your feet before walking all over me  |
|  |
|
18-11-08, 08:56 PM
| #2 (permalink) |
| Premium Member  | the port forward must be done on the modem and router eg: bf = 192.168.1.123 port 50000 so port forward port 50000 to 192.168.1.123 and considering he will also be using a dyndns in it set dmz = 192.168.1.123 also make sure the router is on the same sub net and ip range of the modem because they are different breeds they come factory on different settings what model speed touch and linskys |
|
| |
|
18-11-08, 08:57 PM
| #3 (permalink) |
| Premium Member  iTrader: (14) Join Date: Jan 2008
Posts: 2,780
Spent time on board: 2 Months, 0 Weeks, 2 Days and 7:27:52
| If he has the BF on his network he doesn't need to port forward anything. But do you want to connect to his BF from a remote location? Is he the one with the server? I see the master has answered above! Leroy |
|
| |
| Sponsored Links | |
| | |
|
18-11-08, 09:00 PM
| #4 (permalink) |
| I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia
Posts: 2,948
Spent time on board: 2 Months, 2 Weeks, 3 Days and 11:09:46
| On which piece of equipment does he set the DMZ on ????
__________________ Please wipe your feet before walking all over me |
|
| |
|
18-11-08, 09:03 PM
| #5 (permalink) | |
| I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia
Posts: 2,948
Spent time on board: 2 Months, 2 Weeks, 3 Days and 11:09:46
| Quote:
Yeah he want's to connect to a remote server so he says
__________________ Please wipe your feet before walking all over me | |
|
| |
|
19-11-08, 09:33 PM
| #6 (permalink) | |
| Premium Member | Quote:
its a mess...he obviously has the single port speed touchpro... forget the dmz. just go into the speed touch modem...probably 10.0.0.138 and set the natp settings up...it will be as clear as mud. port forward port 50000 to the ip of his bf430 i use one myself...most reliable modem i have ever used.
__________________ On vacation.... | |
|
| |
| Sponsored Links | |
| | |
|
21-11-08, 10:45 PM
| #7 (permalink) |
| I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia
Posts: 2,948
Spent time on board: 2 Months, 2 Weeks, 3 Days and 11:09:46
| Well at last he can access the BF unit from his mates place  But on his mates server side in GWM it connects and reconnects every 2-3 seconds ???? now what could be causing that ??? cheers
__________________ Please wipe your feet before walking all over me |
|
| |
|
22-11-08, 12:48 AM
| #9 (permalink) |
| I'am Not a Bloody Joke iTrader: (10) Join Date: Jan 2008 Location: Australia
Posts: 2,948
Spent time on board: 2 Months, 2 Weeks, 3 Days and 11:09:46
| Nah  its there only once on the GWM server
__________________ Please wipe your feet before walking all over me |
|
| |
| Sponsored Links | |
| | |
|
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Linear Mode
