NewCS 1.6 reboots reader/card

**Frank Drebin** · 04-06-08, 11:10 AM

My NewCS 1.6 setup (XPPro) has a jaycar phoenix connected via COM port. Every minute or so the reader or the card reboots and goes through the startup sequence. How can I prevent the reboot from occuring?

Whitey is being used. Using 1.5 it does not reboot however I dont get pics. I may have to post my config file when I get home.

**Johnno** · 04-06-08, 11:50 AM

Try this and see if it helps.

<blockga>Yes</blockga>

**Frank Drebin** · 04-06-08, 02:35 PM

Does it matter where in the config file this is placed?

**vyking** · 04-06-08, 04:05 PM

i Have a simlar problem, 1.60 working fine under xp but crashes under server 2003...

**Frank Drebin** · 04-06-08, 05:46 PM

blockga = yes working so far (10 mins). Thanks Johnno!

**CrYpto** · 04-06-08, 11:26 PM

same here ,thanks johnno ,that also worked with newcs 1.5.

**checkitout** · 13-06-08, 09:48 PM

I am thinking of using CCcam/Newcs instead of Greywolf so as to be able to update my card and get my local setup stabilised.

How has this setup been going?

**aaatjs** · 13-06-08, 09:53 PM

newcs 1.6 on kubuntu

2 card setup on jaycars
card 1 keeps stopping, not an update problem as you restart server and it works again - no need to hummy the card.
this seems to happen every 1-2 hours
can anyone shed some light?

**Johnno** · 13-06-08, 11:17 PM

Missed a Plainkey maybe..

**aaatjs** · 14-06-08, 12:29 AM

how would this happen?
seems to come and go this problem....
ok for days them bam! every 10 min to hour it goes off

doin my head in

**mortsamis** · 14-06-08, 11:13 AM

What does the block ga actually do?

**checkitout** · 14-06-08, 01:52 PM

aaatjs - I assume you are also CCcam with NewCS. If this is the case I would suggest to use CCcamtrace on the box when it is having the problem.
This will allow you to read likely error messages so you can then analyse, determine what is happenning and what to do to fix.

Overall it sounds like the NewCs setup is not good.
Does anyone have other info to the contrary?

**MadMAN** · 15-06-08, 11:34 PM

Can some one please help me get Alpha S2 c running back again on a server? It appears that the server has stoped, now I propably need to hook up with some one if I can get a firmware update. A help will be preciated.

cheers

04-06-08, 11:10 AM	#1 (permalink)
Frank Drebin Det. Lt. Police Squad! iTrader: (3) Join Date: Jan 2008 Posts: 345 Spent time on board: 3 Weeks, 2 Days and 13:08:15	NewCS 1.6 reboots reader/card My NewCS 1.6 setup (XPPro) has a jaycar phoenix connected via COM port. Every minute or so the reader or the card reboots and goes through the startup sequence. How can I prevent the reboot from occuring? Whitey is being used. Using 1.5 it does not reboot however I dont get pics. I may have to post my config file when I get home.

14-06-08, 11:13 AM	#11 (permalink)
mortsamis Premium Member iTrader: (0) Join Date: May 2008 Posts: 40 Spent time on board: 10:07:44	What does the block ga actually do? __________________ -- Don't trust me. I have malfunctioned.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-06-08, 11:50 AM	#2 (permalink)
Johnno Member iTrader: (0) Join Date: Jan 2008 Posts: 62 Spent time on board: 0:18:27	Try this and see if it helps. <blockga>Yes</blockga>

04-06-08, 02:35 PM	#3 (permalink)
Frank Drebin Det. Lt. Police Squad! iTrader: (3) Join Date: Jan 2008 Posts: 345 Spent time on board: 3 Weeks, 2 Days and 13:08:15	Does it matter where in the config file this is placed?

04-06-08, 04:05 PM	#4 (permalink)
vyking Junior Member iTrader: (0) Join Date: May 2008 Posts: 13 Spent time on board: -	i Have a simlar problem, 1.60 working fine under xp but crashes under server 2003...

04-06-08, 05:46 PM	#5 (permalink)
Frank Drebin Det. Lt. Police Squad! iTrader: (3) Join Date: Jan 2008 Posts: 345 Spent time on board: 3 Weeks, 2 Days and 13:08:15	blockga = yes working so far (10 mins). Thanks Johnno!

04-06-08, 11:26 PM	#6 (permalink)
CrYpto Premium Member iTrader: (5) Join Date: Jan 2008 Posts: 204 Spent time on board: 1 Week, 1 Day and 22:45:15	same here ,thanks johnno ,that also worked with newcs 1.5.

13-06-08, 09:48 PM	#7 (permalink)
checkitout Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 299 Spent time on board: 4 Days and 12:36:04	I am thinking of using CCcam/Newcs instead of Greywolf so as to be able to update my card and get my local setup stabilised. How has this setup been going?

13-06-08, 09:53 PM	#8 (permalink)
aaatjs Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 32 Spent time on board: 2 Days and 7:38:34	newcs 1.6 on kubuntu 2 card setup on jaycars card 1 keeps stopping, not an update problem as you restart server and it works again - no need to hummy the card. this seems to happen every 1-2 hours can anyone shed some light?

13-06-08, 11:17 PM	#9 (permalink)
Johnno Member iTrader: (0) Join Date: Jan 2008 Posts: 62 Spent time on board: 0:18:27	Missed a Plainkey maybe..

14-06-08, 12:29 AM	#10 (permalink)
aaatjs Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 32 Spent time on board: 2 Days and 7:38:34	how would this happen? seems to come and go this problem.... ok for days them bam! every 10 min to hour it goes off doin my head in

14-06-08, 01:52 PM	#12 (permalink)
checkitout Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 299 Spent time on board: 4 Days and 12:36:04	aaatjs - I assume you are also CCcam with NewCS. If this is the case I would suggest to use CCcamtrace on the box when it is having the problem. This will allow you to read likely error messages so you can then analyse, determine what is happenning and what to do to fix. Overall it sounds like the NewCs setup is not good. Does anyone have other info to the contrary?

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links

15-06-08, 11:34 PM	#13 (permalink)
MadMAN Junior Member iTrader: (0) Join Date: Jun 2008 Location: Nsw, Sydney Posts: 21 Spent time on board: 3:10:59	Can some one please help me get Alpha S2 c running back again on a server? It appears that the server has stoped, now I propably need to hook up with some one if I can get a firmware update. A help will be preciated. cheers