Switching, will this work

**allstarnz** · 07-08-08, 01:24 PM

So, I have the following set up.

One stand alone dish, pointing at C1, single wire going to a STB

One dual LNB dish, with one wire coming out, switching activated by 22KHz tone. LNB points to D1/C1. This has numerous STB's connected to it. C1 can not be used off this dish (as the tone is never turned on). All STB's use D1 only.

I want one of my STB's to access both D1 and C1 without having to buy another LNB (i'm a bit poor right now).

So my plan was either to (preferably) buy a DiSEqC switch to change between the two dishes depending which channel I want.

Will this work?

The main thing I can think of is that the DiSEqC switch will not work due to the 22KHz switch being in place. However as it's after the DiSEQc switch, then I think it woudn't matter.

**bitola** · 07-08-08, 05:09 PM

No mate .........as far as i know you not going to get D1 & CI sats on one dish with one LNB you need a another LNB & DISEqC to get 2 birds on one STB ( setellit reciver) or get another dish & LNB for C1/D1 but you still need DISEqC

Bitola

**allstarnz** · 07-08-08, 08:51 PM

yes yes, I get that. I have two LNBs that point 'live' to the same place, I just want to know if the DiSEqC switch will work properly in my scenario. Especially with the 22KHz switch already on one of the dishes.

At the moment, I can handle this by switching the STB off, and switching the cables over, but it's a PITA

**bitola** · 08-08-08, 02:00 PM

sorry i can't help you with that mate , Austech is full of very helpful members , i think somebody will give you right answer, you mast be patien.

Bitola

**allstarnz** · 08-08-08, 04:54 PM

i ordered one anyhow, I might be able to answer my own question next week

07-08-08, 01:24 PM	#1 (permalink)
allstarnz Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 416 Spent time on board: 1 Week, 2 Days and 0:07:45	Switching, will this work? So, I have the following set up. One stand alone dish, pointing at C1, single wire going to a STB One dual LNB dish, with one wire coming out, switching activated by 22KHz tone. LNB points to D1/C1. This has numerous STB's connected to it. C1 can not be used off this dish (as the tone is never turned on). All STB's use D1 only. I want one of my STB's to access both D1 and C1 without having to buy another LNB (i'm a bit poor right now). So my plan was either to (preferably) buy a DiSEqC switch to change between the two dishes depending which channel I want. Will this work? The main thing I can think of is that the DiSEqC switch will not work due to the 22KHz switch being in place. However as it's after the DiSEQc switch, then I think it woudn't matter.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-08-08, 05:09 PM	#2 (permalink)
bitola Member iTrader: (0) Join Date: Jan 2008 Posts: 46 Spent time on board: 1 Week, 1 Day and 12:15:25	No mate .........as far as i know you not going to get D1 & CI sats on one dish with one LNB you need a another LNB & DISEqC to get 2 birds on one STB ( setellit reciver) or get another dish & LNB for C1/D1 but you still need DISEqC Bitola

07-08-08, 08:51 PM	#3 (permalink)
allstarnz Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 416 Spent time on board: 1 Week, 2 Days and 0:07:45	yes yes, I get that. I have two LNBs that point 'live' to the same place, I just want to know if the DiSEqC switch will work properly in my scenario. Especially with the 22KHz switch already on one of the dishes. At the moment, I can handle this by switching the STB off, and switching the cables over, but it's a PITA

08-08-08, 02:00 PM	#4 (permalink)
bitola Member iTrader: (0) Join Date: Jan 2008 Posts: 46 Spent time on board: 1 Week, 1 Day and 12:15:25	sorry i can't help you with that mate , Austech is full of very helpful members , i think somebody will give you right answer, you mast be patien. Bitola

08-08-08, 04:54 PM	#5 (permalink)
allstarnz Premium Member iTrader: (0) Join Date: Jan 2008 Posts: 416 Spent time on board: 1 Week, 2 Days and 0:07:45	i ordered one anyhow, I might be able to answer my own question next week

Sponsored Links