Thread: gone again

Hey...my first post in this thread...took me long enough...

First thanks to all who have provided info on this issue you guys are legends
i sucessfully updated using the following

SuperNet 488A to hit the card (then pull out straight away)
Then put the card into pheonix connected to GWM with AU disabled and DM client(s).
I also tried using CCcam Server (with Pheonix) with EMU's diabled and its working also DMs as client(s).

but for how long I dont know.

I get the feeling that having a strong receiver is the better choice as you can do more with it but I was happy to see that I could hit the card with the SuperNet.

uflca

Originally Posted by z80

When cards are being sold at the pub it's a joke.

No credibility Checks,

No Reputation checks,

No wonder sellers are getting busted,

& Cards are getting into the wrong hands,


(but,I don't go to the pub, so no wonder I don't have a card )

Mine just went down at 9am. Repeat process and now back up again.

Originally Posted by Gypsy

....might be just me, but my pics just died after a day and a half of viewing. Will just have to try and 'kickstart' the card again and see if I can get another burst going.....

Cheers All....

Same just happened here, Son was watch N/J and it died in the ass. Had to load 1.20 again to get pics then back to 1.27 to keep the pics.
Wouldn`t kickstart in my purple either with 1.27 loaded.

Gee , it all sounds a bit painfull Esp that 0.83 seconds thing.....what if you do it at 0.85 or something ? It ends in tears ?

Originally Posted by Saintaholic

Load 120 Official firmware on.
pull card at the presise time you get a pic or hear audio (0.83sec)
Load 4658x with 127p firmware
you may have to readjust your LNB setting in Dish Setup (Menu)
(it should be 11300 or 10600)
put card in slot
you should get pics immediately

Can you program?? If you dont get any pics with the 120 then you should consider refreshing your card. You may had 'over-updated' the card and the emm's are not handshaking correctly

yeah i have checked all lnb settings, all good.. loaded 120 back on still no pics

nah cant program dunno how to refresh card

Saint, don't you mean 10700 not 10600?

Originally Posted by rick.james

yeah i have checked all lnb settings, all good.. loaded 120 back on still no pics

nah cant program dunno how to refresh card

Maybe you 0.85 secon'd it by mistake ?

( sorry , this thread cracks me up )

Yeah, one of mine went down about 10am too!!

Same here - pics gone so just reloaded 117 to get the card hit, and then 127p to keep the pics. Looks like it'll just be a relatively simple daily chore for a while at least

This loading and reloading of firmware everytime it goes down must be a pain in the arse. Also the precision timing to pull it out when working......is it all worth it?