Thread: gone again

the amount of time between pics is getting longer...for me at least

i know this is a bad question and i have looked for ages but can i get a link to the 127p for strong 4653x thanks heaps

Originally Posted by Shara_Joint

Don't flick through the channels.
Leave it on TV1
You will hear Audio before you see picture, the second you hear audio - pull the card.
Turn the 53X Off
Insert USB and update to 127P
Turn the 53X off
Insert gamma
Turn 53X ON
If you dont have pictures pretty much immediately - pull & insert the card 4 or 5 times. If still nothing then repeat the process, sometimes it just doesn't work first off.

Thank you Shara_Joint, you have saved me from making the mistake of having more kids

Thanks to all, i am now back up and running.

be careful leaving the cards in the supernet for too long guys, I think it may have fried my card, I left it in there for a few days while the fake emm's were going on then when I got a new humax box to try the trick it says invalid card whereas using my friends card I get pics straight away. The stuffed card when swapping back and forth between the supernet and strong also gives an e05 unknown smartcard error also. I'd suggest just switching firmwares on the strong back and forth as pulling the card in and out all the time can't be good for it.

Originally Posted by zane

i know this is a bad question and i have looked for ages but can i get a link to the 127p for strong 4653x thanks heaps

Try this page, should give you all the answers you need.
cheers
megod

Ok im looking 4 firmware 117 for 5643x can anyone tell me where the link is for this been reading 4 ages there is so much shit on here cant see it

You can also get it from the strong web site, .
They have good support for their products

Looking 4 no genuine 117 for 4653 anyone got link 4 that

sorry wrong link posted, correct link

Originally Posted by fred121

Thanks Sanity and Fudda. I think this confirms it's stuffed shame I don't know any sellers any more. Do not ask - Sanity

Thanks

I doubt I'd get a response if I did !!

Cheers

I have been switching my Humax on once a day whilst all the problems been happening. I have noticed that the pics came up every 2 mins for 10 secs, today the time varied between 2 and 4 minutes and at one stage the pics lasted for 30 secs. But when the pics came it was always at exactly the same time space, eg exactly 2 or 4 mins from the time the last pics started.

Originally Posted by dimefan90

the amount of time between pics is getting longer...for me at least

Originally Posted by gerry113

I have been switching my Humax on once a day whilst all the problems been happening. I have noticed that the pics came up every 2 mins for 10 secs, today the time varied between 2 and 4 minutes and at one stage the pics lasted for 30 secs. But when the pics came it was always at exactly the same time space, eg exactly 2 or 4 mins from the time the last pics started.

mine had been coming on every 2 1/2 mins but now its about 5

Originally Posted by dimefan90

mine had been coming on every 2 1/2 mins but now its about 5

mine is still about the same 2 to 4 mins is about right since the start of the problems.

for all those looking for hummy software you can find most of it here.

Originally Posted by apple

Thanks for the help because I have been trying 120 and with cam and without for 2 days now only 2minuts with 153p and all is fine, thanks again....phhew! i was going to smash the boxes.

what strong model do u have??
cheers
trev

Hey guys great work read for hours and the answer you seek in reading
amazing.put whitey in Humax pics & sound pullout quick pit in strong bloody great all that in 3 min.Ha HA up & running 4now