Help with a wafer (AuGV03) ??

***fergs*** · 22-06-08, 11:57 PM

Hi all,

looking for a bit of help with a card ..

open platform (on front with face pic)
"EVIL" etched in the chip area
purple rear color with 001082925-1001 AT90(P1)

Is this a silver ??

1 of the only programs i can find to read the data is Card Wizard
& in it it says info : AuGV03

does this mean this card is programmed as Ausgold ???

if so what program should I be using to read / edit card details please..

**hoe** · 23-06-08, 12:19 AM

funcard..........

***fergs*** · 24-06-08, 12:18 PM

Quote:

Originally Posted by hoe

funcard..........

OK thanks hoe...

what program should i be reading it with / re-programming please ??

i found very little reference to these cards...

one said it may have been a "silver card"

**aaeon.1** · 24-06-08, 12:59 PM

icprog
fmcard
ponyprog if its a blank
if you're recycling a Funcard, skip the IC-Prog programming step and just
use FMCard to reprogram the data and keys.
For Silver, Emerald and Fun use the same file: GEmerald.crd

**harry5** · 24-06-08, 04:08 PM

Have exactly the same card here

Quote:

open platform (on front with face pic)
"EVIL" etched in the chip area
purple rear color with 001082925-1001 AT90(P1)

comes up as, Pic 16F877 found. EEprom 24C64 found.with auto detect in mp3.4 & Elvis so I'd say your right, a silver with Ausgold Version 3 or year 03 .Have a look for Ausgold Card Writer exe may be able to read it with that cheers h5

**marty 17** · 24-06-08, 04:09 PM

Quote:

Originally Posted by aaeon.1

icprog
fmcard
ponyprog if its a blank
if you're recycling a Funcard, skip the IC-Prog programming step and just
use FMCard to reprogram the data and keys.
For Silver, Emerald and Fun use the same file: GEmerald.crd

Hopefully some one can help me with a gold please.

**aaeon.1** · 24-06-08, 07:13 PM

just use fmcard

if it has been preprogrammed

drag your .CRD file containing keys into the bottom box and click send

**marty 17** · 24-06-08, 08:41 PM

Many thanks aaeon.1

***fergs*** · 24-06-08, 08:59 PM

Quote:

Originally Posted by harry5

found with auto detect in mp3.4
a silver with Ausgold Version 3 or year 03 .
Have a look for Ausgold Card Writer exe may be able to read it with that cheers h5

Harry..

whats this "mp3.4" ???

will look for Ausgold Card Writer also..

Thanks everyone for the help so far....
dont wanna kill the card, just make it go again..

**harry5** · 24-06-08, 09:09 PM

Software written for Elvis programmer

***fergs*** · 24-06-08, 09:17 PM

Quote:

Originally Posted by harry5

Software written for Elvis programmer

OH ok..

thanks.. dont think it would work with my Mastera..

thanks again everyone....

**CONAXLE** · 24-06-08, 10:34 PM

Quote:

Originally Posted by *fergs*

OH ok..

thanks.. dont think it would work with my Mastera..

thanks again everyone....

if you have any doubts,....The Bald Guy...Lol!

***fergs*** · 26-06-08, 04:11 PM

Just wondering if its possible to send a new ATR to the cards..

silvers read as not ATR.. so wont work.. (FM card)

a few others wont read as they dont have ATR either..

still looking for a reall multipurpose program that will read all

***fergs*** · 06-07-08, 06:27 PM

What is the cause of " Unknown ATR " its on a silver ??

how do i fix the problems please anyone ???

**mickc** · 06-07-08, 08:26 PM

if the card works then the problem is your programer/program settings
or cable

***fergs*** · 06-07-08, 08:34 PM

Quote:

Originally Posted by mickc

if the card works then the problem is your programer/program settings
or cable

Silver doesnt work.!!

when i read it with FMcard , it comes up with unknown ATR

then all the other info..

ascii serial
hex serial
prov id etc

I'm assuming the reason its doesnt work is the unknown ATR

**Rocket** · 07-07-08, 05:45 PM

FM card doesnt work very well with XP try win 98

***fergs*** · 07-07-08, 10:38 PM

Quote:

Originally Posted by Rocket

FM card doesnt work very well with XP try win 98

Yeah well from the hassles i started with

everything lately is all done under 98se...

my question is though...

WHY cant I give it a new ATR..

OR how do i give it a new ATR.. after that it should be working again..

can pull the ATR from my Au*ora card if need be just need to know if it can be done & how / what to do it..

**mickc** · 08-07-08, 11:48 AM

the atr can be changed but you need to know the code on the card
you can try a few programs to write some details to maybe determine the code
or you could read the card with icprog and edit the hex file but it will more than likley be protected
or you can just reprogram and enter your details

22-06-08, 11:57 PM	#1 (permalink)
*fergs* Senior Member iTrader: (0) Join Date: Jan 2008 Location: Perth Posts: 257 Spent time on board: 2 Weeks, 2 Days and 8:33:19	Help with a wafer (AuGV03) ?? Hi all, looking for a bit of help with a card .. open platform (on front with face pic) "EVIL" etched in the chip area purple rear color with 001082925-1001 AT90(P1) Is this a silver ?? 1 of the only programs i can find to read the data is Card Wizard & in it it says info : AuGV03 does this mean this card is programmed as Ausgold ??? if so what program should I be using to read / edit card details please..

23-06-08, 12:19 AM	#2 (permalink)
hoe PengontrolKualitasPelacur iTrader: (12) Join Date: Jan 2008 Location: teluk jelek serigala Posts: 1,066 Spent time on board: 1 Month, 2 Weeks, 5 Days and 17:06:05	funcard.......... __________________ hoe@austech.tv

07-07-08, 05:45 PM	#17 (permalink)
Rocket Premium Member iTrader: (0) Join Date: Jan 2008 Location: NSW Posts: 102 Spent time on board: 3 Days and 11:27:35	FM card doesnt work very well with XP try win 98 __________________ Don't worry, it only seems kinky the first time.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

24-06-08, 12:59 PM	#4 (permalink)
aaeon.1 Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 175 Spent time on board: 2 Days and 19:07:46	icprog fmcard ponyprog if its a blank if you're recycling a Funcard, skip the IC-Prog programming step and just use FMCard to reprogram the data and keys. For Silver, Emerald and Fun use the same file: GEmerald.crd

24-06-08, 07:13 PM	#7 (permalink)
aaeon.1 Senior Member iTrader: (0) Join Date: Jan 2008 Posts: 175 Spent time on board: 2 Days and 19:07:46	just use fmcard if it has been preprogrammed drag your .CRD file containing keys into the bottom box and click send

24-06-08, 08:41 PM	#8 (permalink)
marty 17 Premium Member iTrader: (5) Join Date: Jan 2008 Location: Northern rivers Nsw Australia Posts: 286 Spent time on board: 3 Weeks, 4 Days and 10:53:13	Many thanks aaeon.1

24-06-08, 09:09 PM	#10 (permalink)
harry5 Member iTrader: (2) Join Date: Jan 2008 Posts: 77 Spent time on board: 2 Weeks, 0 Days and 10:44:31	Software written for Elvis programmer

26-06-08, 04:11 PM	#13 (permalink)
*fergs* Senior Member iTrader: (0) Join Date: Jan 2008 Location: Perth Posts: 257 Spent time on board: 2 Weeks, 2 Days and 8:33:19	Just wondering if its possible to send a new ATR to the cards.. silvers read as not ATR.. so wont work.. (FM card) a few others wont read as they dont have ATR either.. still looking for a reall multipurpose program that will read all

06-07-08, 06:27 PM	#14 (permalink)
*fergs* Senior Member iTrader: (0) Join Date: Jan 2008 Location: Perth Posts: 257 Spent time on board: 2 Weeks, 2 Days and 8:33:19	What is the cause of " Unknown ATR " its on a silver ?? how do i fix the problems please anyone ???

06-07-08, 08:26 PM	#15 (permalink)
mickc Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 430 Spent time on board: 1 Month, 2 Weeks, 5 Days and 12:00:32	if the card works then the problem is your programer/program settings or cable

08-07-08, 11:48 AM	#19 (permalink)
mickc Premium Member iTrader: (2) Join Date: Jan 2008 Posts: 430 Spent time on board: 1 Month, 2 Weeks, 5 Days and 12:00:32	the atr can be changed but you need to know the code on the card you can try a few programs to write some details to maybe determine the code or you could read the card with icprog and edit the hex file but it will more than likley be protected or you can just reprogram and enter your details

Sponsored Links

Sponsored Links

Sponsored Links

Sponsored Links