It seems you described issues with the connector, but then ask about replacing coax :D
F type aren’t the only suitable 75 ohm connectors... N type are easier to thread, and bulkier.
Do you have...
Type: Posts; User: Art
It seems you described issues with the connector, but then ask about replacing coax :D
F type aren’t the only suitable 75 ohm connectors... N type are easier to thread, and bulkier.
Do you have...
Thanks again guys :)
Irdeto did have a YT vid of mine deleted some years ago.
It was just a straight animated PMK decrypt demo similar to the one in that vid, but no commentary, and without any...
Glad it wasn’t a crap video then :D
I’d have loved a real card for the vid, and thanks for the offer, but I don’t think I’ll revisit it now.
I should have maybe come fishing for one before doing...
A lot omitted I know, but hopefully no screwups.
It’s my 19 minute or so take on the piracy situation i the early 2000’s
https://www.youtube.com/watch?v=CmAnCzquo64
Learjet, the thing with the flat Earthers, it doesn’t take a lot of equipment to capture a NOAA image themselves. A USB dongle for maybe $25 and a wire coat hanger antenna.
There’s the ISS, even...
I should probably update this... Cheap China DVBS2 meters are definitely out there.
iBravebox V8 & V9 are both capable of displaying VAST tuning channel, as is the newer SatLink SP-2100.
I find...
I’ve opened mine, and for the non-PVR version there’s no mounting footprint or connector.. it must be a different PCB.
If you have the PVR version, I can’t see how they’d fit a 3.5 in there, but...
Hi, I was going by this page: https://www.vansat.com.au/optusd1.shtml
but suppose I programmed in the wrong transponders.
This isn’t something I’ll try from home.
I have a Foxtel dish with dual...
Hi, Just back from a camping trip, and I was able to aim and watch VAST, and also tuned D2 (DUNA TV, ESRITV, a bunch or religious channels, K-Mart Radio, etc).
Then I tried D1, but no cigar.
The...
The units linked in the first post are the two I was comparing. Don’t know how I missed the MPEG 2 AND 4 part though.
Unfortunately I pulled the plug on the cheap one just before MTV’s last post...
It appears the difference is MPEG 2 vs MPEG 4. The eBay ones can’t tune VAST channels because they are all MPEG 4 (so Satking claims in their description).
The eBay ones will tune Al Jazera or some...
It can’t scan with 12447 vert entered. for UEC DSD-4921-RV.
If bit error rate could be expressed on screen as “Signal Integrity” or “Signal Quality”, Youtube reveals that it does (iBravebox V9).
I’ll have a go later tonight if no-one else does first.
Hi, I'm wondering the differences between an eBay satellite finder:
...
Yeah I did the traveller activation just out of impatience, but a permanent Qld one would be nicer.
I worry about forgetting to register in six months time and finding out it doesn’t work on a trip...
Looks like is dead in here now :D 36 month warranty looks new for this model.
Hi, 4921RV is what I have on the way, but I wouldn’t know what was better about it, my last sat boxes being Humax and Tandberg both Std Def.
The manual is available if no-one has noticed in the last...
Old thread I know, but aren’t these VAST cards related to individual decoder boxes now?
I think the SatKing decoder I’m looking at has the CAM and card both built into the decoder.
Not sure, but...
If the Oregon map screen doesn’t rotate to a destination point, the Compass can still be set to point to it,
and you don’t need a map on your own property so...
Also, greetings from Ipswich, Qld.
Funny enough, I purchased Topo Australia V5, then Garmin’s web thing happily ate the product key,
and thereafter said the key was consumed, but the map never unlocked, and I was unable to use it on...
There are four modes of SPI relating to clock edge, phase, and clk polarity. Have you tried all?
That was all well & good for 60csx. The 64st, different story :O
Install Basecamp with the Topo mapset as you normally would,
Use GarminUnlocker.exe in command line to point directly at the mapset TBD file:
c:\garminunlocker tbd C:\ProgramData\etc (file path to...
Later on after posting yeah :D It’s up to version 9 now!