LOL
this is like a 1984 arcade game.
CLASSIC
Hi, I have installed Mgcamd 1.31 on my Dreambox 800 HD receiver. I have then inserted a blank SoftCam.key file into the "usr\keys" folder with the cw0 and cw1 keys for a particular channel. When I restart the mgcamd emu, and switch onto the Foxtel channel with the keys, the "I" for irdeto turns green, and also says "decode emu 0604", but no picture or audio comes up.
Are just the cw0 and cw1 keys for a particular Foxtel channel sufficient to open up the channel? Or do I need more files, such as the Autoroll.key file, that contains other keys?
I also want to point out that I don't have a card, and I don't have the autoroll.key file with more keys, I just have the cw0 and cw1 keys.
Thanks.
Look Here -> |
LOL
this is like a 1984 arcade game.
CLASSIC
I thought that it will work, but it doesn't. Thanks anyway.
You would be better off getting a c band dish and play with the cracked power Vu channels.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Apparently a bunch of good channels also on NSS9 at 177W if you're lucky enough to find emm keys (none here)
Last edited by Hillsbysa; 18-09-16 at 01:40 PM.
You need the software I2 emulator running in your Dm e2 reciever first then comes to keys which need to be put in the right section of the config file.
Bookmarks