read around forum, all info is here. Just have to read.
Hi there
I have a gold card from back in the days which had fox/aurora on it. i understand that the fox channels no longer work on goldie but was under the assumption that the fta win, imp, gwn etc did. Anyway i placed the goldie into my humax 5400 reciever and i get the following message
Irdeto CA Status 30 - The card has no rights for this service
Does this mean that card card is waiting to update or do i have to update it with a programmer and new files.
Any help or advise you can provide would be greatly appreciated
p.s. if i do need to update it with a programmer and new files would somebody pls pm me with the latest files for aurora for goldie.
If you need any details about card info pls also let me know and i will provide it
thanking you in advance
mcmuzzy
Look Here -> |
read around forum, all info is here. Just have to read.
i have been reading and i found farmsky's tutrotial but i need the hex file etc that he talks about in order to place on the card . Any advise ?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Love the verandah mount leigh.
Top quality workmanship, how does it fly with the one who should be obeyed??
the early golds only had a pmk for aurora all othe details were for fox/austar
you dont need to reprogram card you only need to edit the details with lmedit or ggedit
thats if ghostgold is loaded on the card
thx for the advise how do i know if ghostgold is on the card and which details do i edit
p.s. can i do this on win xp i am runnung xp 64 bit sp2 or do i need to run win 98 pls advise also to i connect via serial or usb what do u recommend
If anyone could pls advise step by step on how to edit the goldie succesfully could u pls advise or pm me as this is the first time i am doing this and would love to get it right the first time round
thanking you in advance and pls forgive my lack on experience
mcmuzzy
Last edited by mcmuzzy; 24-08-08 at 04:27 PM. Reason: update
Have you read ?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
yes i did Leroy but the problem i am having is that Lmedit will not initialise. Is it because i am running win XP SP2 X64 version with ntfs file format ? The tute does not specify if i need win98 with Fat32 file system that is my main question
dont worry about the goldie
you will need a irdeto1 aurora card first to extract the details to program a gold card
I'm running XP SP2 without any problems....I'm sure mines not x64 and I wouldn't think hat would matter.....my bigest initial problems was finding installing and correctly registering the ocx files, I soon as I had correctly registered these files in the system everything went smoothly, I would post them post for you but I've lost my usb stick.
you should be able to google these files
Democracy & Ignorance = A Winning Combination
i have just installed xp32 bit and when i go to initialise program lmedit or ggedit i get error msg
"comdlg32.ocx is not correctly registered. a file is missing or invalid"
thx for that everything works fine but when i go o read the card i get message saying data interrupted - check card and connections when using LME however when using GGEdit i get Data Corrupted or Interupted
Could anybody pls give me any advise ?
I am using Mastera V programmer
I have usb to serial converter cable
Running XP 32 bit SP2
File format NTFS not FAT32
thx for that leroypatrol i have just aquired a serial port pci card and have installed it the question i have is what setting do i use on Lmedit or ggedit for the goldie in order to update it
i need to know the following settings
Mode - phoen or smart
MHz - 3.5 or 6 or 10 or 20
Card Type - GGold or GS / e/f
Opts - old i/o or nofifo or the last blank box
reason being is i have tried setting the mastera V to
Com 3 (also tried com 4) because i have installed the pci card and that is what it come under in device manager on XP
Lock coco 1 and 3
MHZ: 6
Mode: Phoenix
and all i get is error message (Timeout werror reading data) - this is with ggedit_2_31r2
however with Lmedit i get the following error (Data interuppted check card and connections)
Any help you can give me or workarounds would be greatly appeciated
Last edited by mcmuzzy; 07-09-08 at 01:10 PM.
Bookmarks