You need to put the panel identifier code and the other code in baby ware for the panel to accept the connection, by default it is blank in baby ware, if your unsure just put 0000 in both boxes
Hi,
I have installed a EVO192 panel with a TM50 Touchscreen and some hardwired PIRs.
I wanted to program the panel with the "Babyware V2.9.9" software.
Looks like the communication works, i get couple of green ticks and the software recognises the panel with serial number.
At the end I get to red crosses and cannot established a connection to the panel.
X Initiating panel connection -> TimeOut
X Wrong Panel ID.Authentication failed -> Error
Does somebody have some hints what it might the problem?
Cheers,
Michael
Look Here -> |
You need to put the panel identifier code and the other code in baby ware for the panel to accept the connection, by default it is blank in baby ware, if your unsure just put 0000 in both boxes
Hi Michael, the default is 1000 for panel identifier. cheers Cruzer
How are you connecting baby ware to the panel
Have you ever successfully connected to another Paradox panel?
You will find getting a USB to Serial converter, port assignments and everything else your biggest challenge the first time.
Just because the software says it's connected does not always mean it is. I've had panel upload/download software say it was "connected" despite being routed to a different port with a faxmodem on it, shortly before failing and timing out (of course).
Sounds like you're a bit closer than this, but the above may help some poor sod in the future.
Yeah through the ip150
Post a screenshot of the connectiong settings.
That all looks normal.
I would double check your 2 passwords for the remote access.
Verify them via the code pad and see what that does
also, can you browse to 192.168.1.100 via web browser port 80?
[QUOTE=deanfourie;714045]But hes not getting a authentication failure
True but I opened baby ware and changed one of my passwords to be incorrect, the second one.
I was getting a similar response but not the same as his.
Gotta start from the ground up
Under details it says "Wrong Panel ID. Authentication failed - Result: Error"
Is the second password under "System / PC Password" supposed to be the installer code?
Bookmarks