what signal strength on TV1?
HI lad's,
kinda fustrated atm i cannot get friend dm500c to show channel on nds subby
Gemini 4.10 & ccam 2.0.0.
00618
64qam
06950
fec Auto
It scans all the channel line ups fine i get all the names the only pics i can see comming thru is TVSN & Foxtel Help channel. I have also tried a drop amp which boost's the signal by 7db still no joy.
Can some shed some light with me I remember reading a post before the forum crashed.
Chieflets
Look Here -> |
what signal strength on TV1?
not 100% sure but i get
73%
49 - 53%
signal
Chieflets
Have you tried another version of ccam... I have attached 1.7.1
had to be uploaded to rapidshare cant attach here???
the cable units all went belly up a while back, has this changed?
lol
inv is ticked - I get all channel names on my dm500c when i do a scan i get TVSN & foxtel help channels displaying but all others service could not be found using a blue card nds subby Iam not card sharing
Chieflets
sounds silly but have you got the card the right way up ?
cant remember which way it goes but try turning it over.
all is good i have done everything right the only thing i can see what it might be is camms
what cams did everyone try it on mgcamed ....ccamed..? and what versions taking using nds not irde2
Chieflets
if you like i can upload you a working cable image... but the above rapidsahre ccam version i posted should work.
i can upload this one it at the time of relase by Z worked with the N*S in the slot
dm500s Server-internal and external cards-gamma and N*s
dont say linux if i wanted it id install it
Np fellas,
will try a few tonight appreciate your help on this one has to be some silly that i have missed infront of my eye's cause i know same image works on dm500s nds card slot and external phoniex on gamma's.
just makes it hard when u don't have cable in your own home to play with
Chieflets
Bookmarks