Originally Posted by
mtv
Does it display signal quality as a separate scale to signal strength?
My tip to tuning VAST is to use the tuning screen on the TV/decoder to get the dish and skew settings.
Then... set the LNB skew to the approximate recommended setting for location FIRST... then align the dish for maximum signal strength, then make fine (very fine) adjustment of the LNB skew to maximise signal quality.
Most manuals tell you the other way around... align the dish first, but if the LNB skew is out a fair bit to begin with, a lot of meters/tuners won't even register a reading, so getting the skew close to start with, makes it a lot easier.
Bookmarks