got the wrong satellite mate! ERT is on Optus D2, which may be B3, as it is a replacement for B3. a dish needs moving. good luck.
Hi everybody
As with most other followers of ERT, I am having problems rescanning the channels back into the Toppie - methinks my mistake was to delete the B3 setting (including TP settings) and for the life of me, I can get it working!!
I have checked the following freq:
D1 = 160.0E
12518 V 22500 - comes back with mostly sky related stuff
12643 V 22500 - nothing
12707 V 22500 - nothing
12733 V 22500 - nothing
12706 V 22500 - nothing
12394 H 22500 - nothing
12608 H 22500 - nothing (can you see the trend here !!!
12420 H 22500 - nothing
12581 H 22500 - nothing
12608 H 22500 - nothing
12644 H 22500 - nothing
12671 H 22500 - guess what ..... nothing!!!
To check things, I tuned in Al Jazeera in C1 to see if I was having a problem there - no prbs!!!. Have checked current channels on D1 (SBS etc) - no problems there either?? I also have Select install on PAS8 and that is working a treat.
I know it must be something obvious but I can not see what it is.
Setup info
Toppie 3000CIPro System ID 201, Loader Version A3.01, Dev Version 4.4.14
SG2100 Motek - original Austech group buy
65cm dish
Select + CAM.
Any help would be greatly appreciated and sorry for the long rant!!!!
Cheers
Look Here -> |
got the wrong satellite mate! ERT is on Optus D2, which may be B3, as it is a replacement for B3. a dish needs moving. good luck.
D'oh - Who feels like a dill now !!!!!!!
All aok now :P
Ta big mick000 - deadset legend!
Lesson here - read instructions CAREFULLY!!!!!!
Bookmarks