i have the DSL-AC68U and works great on nbn fttn with ABB
i get 85 down 35 up at 320-350 meters from the node.
From there everything in the house is hard wired via tplink
managed Gigabit Ethernet Switch's which are also great units.
As for the wireless i find it very good with reception on the tablets
and mobile phones etc whether i am inside the house or out in the yard.
One consideration you have to look at before selecting your modem is the
distance from the node because asus use mediateck chips and are a little slower than
broadcom chips which work better at longer distances.
You mentioned that you want cctv the tplink switch's also
come with POE built in
As for Annex B why ???? Australian FTTN uses Annex A
Modulation: VDSL2
G993.2 Annex: Annex B (Europe Bandplans)
G992.5 Annex: Annex A (over POTS)
VDSL2 Profiles: 17a
VDSL2 PVC VPI/VCI: Auto or PTM
G.INP / G.998.4: Enabled (not enabling G.INP will result in a locked port)
G.Vector / G.993.5: Enabled
SRA (Seamless Rate Adaptation): Enabled
Also if you go the asus way you must make sure that
G.INP (G.998.4) and G.vector (G.993.5) are enabled before plugging into the phone socket
or you will get a port lock so make sure you do the setup before connecting to the phone line.
Bookmarks