GWM 071b

**conan_oz** · 30-01-08, 11:46 AM

Looks like you can't run a TCP client with a serial to a PC with this new version or am I missing something?

**z80** · 30-01-08, 08:21 PM

Hmmm...what are you trying to connect?

**fandtm666** · 30-01-08, 08:25 PM

hummy via season

**conan_oz** · 30-01-08, 08:32 PM

Originally Posted by z80

Hmmm...what are you trying to connect?

Yes a hummy via a season on another Lan PC, not the PC with the Card reader as I know you can use another com port.

**jamie_s** · 30-01-08, 08:37 PM

yeah seems as if its not implemented yet...
z80 do you know if the data protocol is the same as previous versions, ie maybe run the 865 client with the 071 server? I havent had time to test yet.

**z80** · 31-01-08, 02:07 AM

Originally Posted by jamie_s

yeah seems as if its not implemented yet...
z80 do you know if the data protocol is the same as previous versions, ie maybe run the 865 client with the 071 server? I havent had time to test yet.

no that will not work.

Use a bf430 for a remote Humax/etc that is the way the author intended it.

sattronics sell them and it is by far better than a remote pc.

**kingie05** · 01-02-08, 02:46 PM

I finally got the time to setup & try out GW, a nice little program. But I’m having some issues with my dreambox’s not always connecting.

What happens is my GW server runs a whitey , then I start the server & one off my DM’s connects successfully & gets pics no problem, then I change channel on DM to another provider (Optus B3) with that connection being on another server running NEWCS, at this stage it is still working fine & gets pics.

Now the problem I’m having is when I decide to change channels back to GW, it has no pics at all & on GW server it displays this client(DM) ready but not connected, but previously it had connected & the ” running” message.

Is anyone else having this same issue or have I missed some configuration steps on my GW server?

Cheers

Kingie05

**mudcrab** · 01-02-08, 07:27 PM

about the only thing I'd suggest is maybe using a different cam for your B3 viewing ie mgcam and sticky that for the B3 provider..............that way when you connect to B3 the cam will stop on your GW and start on the newcs server, when you go back, again the cam will stop and the other will start, should create the connections without much trouble I hope

**kingie05** · 01-02-08, 10:40 PM

But the strange thing is that when GW looses a DM client connection, it does not automaticly accept another connection from same DM client, if client is trying to reconnect, I then need to restart GW & then DM client connection is accepted.

I don't know if there is something that I need to configure on server or is it a bug with this version of GW.

Anyone?

Cheers

Kingie05

**fandtm666** · 01-02-08, 10:49 PM

Originally Posted by kingie05

But the strange thing is that when GW looses a DM client connection, it does not automaticly accept another connection from same DM client, if client is trying to reconnect, I then need to restart GW & then DM client connection is accepted.

I don't know if there is something that I need to configure on server or is it a bug with this version of GW.

Anyone?

Cheers

Kingie05

could be the cam , ive been running it with

1x mgcamd local 2 x www
1x cccam 2.0 local
1x cccam 2.1 local
1x cccam 2.5 local
and a couple hummys and the unit has not been rebooted once since the day it was released and the dreams pick up straight away when i have reset them on purpose as have the two over the www when i reset the dyndns if it does not pick up the correct addy

**Decapper** · 03-02-08, 01:23 PM

I would say (besides the fact I'm simple) that I'm doing something wrong. I stopped the old GW and started this new. The new GW connects to all my shares but it will not read any card info no matter what type of card I use. I have the new one setup with the same settings as the old one. Expect for the camkey and such which I don't understand. I thought it was simple but seems it has the beter of me. Any have a suggestion I what big switch I did not flick on.

**fandtm666** · 03-02-08, 01:41 PM

Originally Posted by Decapper

I would say (besides the fact I'm simple) that I'm doing something wrong. I stopped the old GW and started this new. The new GW connects to all my shares but it will not read any card info no matter what type of card I use. I have the new one setup with the same settings as the old one. Expect for the camkey and such which I don't understand. I thought it was simple but seems it has the beter of me. Any have a suggestion I what big switch I did not flick on.

1: have you added the card through CARDS/ ADD RS232 and set it for auto start

2: once card is added you must then assign that card for each client

3: DO NOT use the old ini file. You must input all details into GWM manually so it creates the correct ini

**Decapper** · 03-02-08, 01:43 PM

Yeah added the card as RS232.. Under card details I get no info (unlike the old GW)

Also assigned the clients to the card.. Just trying aurora details and see if at least I can get that working

**fandtm666** · 03-02-08, 01:47 PM

try clicking start card have noticed sometimes does not start on its own.

Aurora is tricky to setup

**Decapper** · 03-02-08, 01:52 PM

It has started. As I get a response cardtime for the card 49

**Decapper** · 03-02-08, 02:01 PM

I hope there is no info in here that kills me

Sending : COCO [0102020300003D7D7D7D] [10]
03 Feb 2008 12:55:30 Whitey : RS232 Timeout
03 Feb 2008 12:55:31 Whitey : 0102020300003D7D7D7D
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Ascii Serial [0102000300003FCDD3D5] [10]
03 Feb 2008 12:55:31 Whitey : 0102000300003FCDD3D5
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Hex Serail [0102010300003E000000] [10]
03 Feb 2008 12:55:31 Whitey : 0102010300003E000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 00 [0102030300003C000000] [10]
03 Feb 2008 12:55:31 Whitey : 0102030300003C000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 00 1C [01021C03000023000000] [10]
03 Feb 2008 12:55:31 Whitey : 01021C03000023000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 10 [0102030301003D000000] [10]
03 Feb 2008 12:55:31 Whitey : 0102030301003D000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 10 1C [01021C03010022000000] [10]
03 Feb 2008 12:55:31 Whitey : 01021C03010022000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 20 [0102030302003E000000] [10]
03 Feb 2008 12:55:31 Whitey : 0102030302003E000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 20 1C [01021C03020021000000] [10]
03 Feb 2008 12:55:31 Whitey : 01021C03020021000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:31 Whitey : Sending : Provider ID 30 [0102030303003F000000] [10]
03 Feb 2008 12:55:31 Whitey : 0102030303003F000000
03 Feb 2008 12:55:31 Whitey :
03 Feb 2008 12:55:32 Whitey : Sending : Provider ID 30 1C [01021C03030020000000] [10]
03 Feb 2008 12:55:32 Whitey : 01021C03030020000000
03 Feb 2008 12:55:32 Whitey :
03 Feb 2008 12:55:32 Whitey : Sending : Card File 1 [01020E02000030000000] [10]
03 Feb 2008 12:55:32 Whitey : 01020E02000030000000
03 Feb 2008 12:55:32 Whitey :
03 Feb 2008 12:55:32 Whitey : Sending : Card File 2 [01020E03000031000000] [10]
03 Feb 2008 12:55:32 Whitey : 01020E03000031000000
03 Feb 2008 12:55:32 Whitey :
03 Feb 2008 12:55:32 Whitey : Sending : Config [01020803000037000000] [10]
03 Feb 2008 12:55:32 Whitey : 01020803000037000000
03 Feb 2008 12:55:32 Whitey :
03 Feb 2008 12:55:32 Whitey : Sending : Crypted Info [01021100004011C1F9DC8640ABA3A69AD2D9A66287198586F7 B4A98293DEBD5583E5D4331B8688570005CC2625BD2A5B82BD BD51F14AC0641DF111F0933606EBB8BB5F1C68B52400000000 00000000000000000000000000000000000000000000000000 000000000000] [106]
03 Feb 2008 12:55:32 Whitey : 01021100004011C1F9DC8640ABA3A69AD2D9A66287198586F7 B4A98293DEBD5583E5D4331B8688570005CC2625BD2A5B82BD BD51F14AC0641DF111F0933606EBB8BB5F1C68B52400000000 00000000000000000000000000000000000000000000000000 000000000000
03 Feb 2008 12:55:32 Whitey :
03 Feb 2008 12:55:32 Whitey : 010209030040942DE484A1CDB8A21B9A03336EBF05001D4CC7 D5735DAF4FF57D27F60806C4A3E147652F820724BF8A6300FF 6E971960B38485A1D4396E5FB982A0F4FA2F48CF97
03 Feb 2008 12:55:32 Whitey : Camkey : 942DE484A1CDB8A2

**fandtm666** · 03-02-08, 02:14 PM

open the ini file and scroll down to [MISC] and check to see if has the same as below if not copy and paste this in and change the number of clients to suite EG 3 clients = user_count=3

[MISC]
User_Count=1
Max_Card_Log_Lines=100
Max_Client_Log_Lines=100
AutoStart=true

**Decapper** · 03-02-08, 02:19 PM

Just installed it on another laptop with winxp and works perfect. So either,

Does not like win98se
Does not like old laptop.

I only have 128meg on that laptop so can't hit winxp on it even if I wanted.

Anyone else using win98se to run it?

**Decapper** · 03-02-08, 02:25 PM

Originally Posted by fandtm666

open the ini file and scroll down to [MISC] and check to see if has the same as below if not copy and paste this in and change the number of clients to suite EG 3 clients = user_count=3

[MISC]
User_Count=1
Max_Card_Log_Lines=100
Max_Client_Log_Lines=100
AutoStart=true

thanks fandtm666 for your help.. Seems its not me..