Hi,
got the card recognised at 3.57MHz but still no joy.
Cheers
Hi,
on newcs 1.62:
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ EMM Cache ] Initialising dynamic Cache
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ ECM Cache ] Initialising dynamic Cache
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Loader ] Starting Telnet on port 3001
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ SockSrv ] Server thread started
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Loader ] Reader type 2 on node /dev/ttyS0
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Opening device /dev/ttyS0
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Setting Parity to: ODD
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Setting Baud to custom 16129
Sep 18 10:50:59 192.168.0.254 [ 10:50:59 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Read on fd 5 (len=21 timeout=5300ms)
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ ATR ] T=0 1etu=62.00us Guardtime:14etu WWT:14400etu
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ ATR ] Historical bytes: A [B0] [03] i [FF] J P [F0] [80] [00] F D [03]
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Loader ] Init NDS card
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Setting Parity to: ODD
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Setting Baud to custom 16129
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Write on fd 5 (len=5)
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Read on fd 5 (len=5 timeout=1393ms)
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Phoenix ] Echo mismatch
Sep 18 10:51:01 192.168.0.254 [ 10:51:01 ] [ Serial ] Read on fd 5 (len=1 timeout=800ms)
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ Serial ] Read timeout (0 of 1)
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ NDS ] Could not get P3
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ NDS ] i/o error ?
Sep 18 10:51:02 192.168.0.254 [ 10:51:02 ] [ Loader ] Card 0900 on port /dev/ttyS0 failed
Would be a 6MHz something to do with it?
Cheers
Look Here -> |
Hi,
got the card recognised at 3.57MHz but still no joy.
Cheers
if this is an orange card forget it if its a blue mate theres heaps of examples around its nothing special to set up.
Bookmarks