-
Bosch ICP-CC404 key switch option help
Hi guys, I’m having a little problem with ICP-CC404 Bosch panel key switch option setup,
I can only get the panel to arm with the key switch, cannot disarm panel with the key switch,
what I have for zone 8 option 11,0,0,1,12,1,8 and in location 431 option 3,
any help would be great, thanks
-
Junior Member
- Rep Power
- 0
- Reputation
- 10
Hey, any chance you could shed some light on what the issues were? I'm running into similar issues, the keyswitch zone just refuses to work, correct programming and wiring. thanks
What have you done so far?
Is a CC404 panel?
What type of keyswitch input are you using? momentary or latching and n/o or n/c
When selecting keyswitch zone type 11 the zones option 1 now represent keyswitch options.
In the OP he had "I have for zone 8 option 11,0,0,1,12,1,8" but if should be 11,0,0,8,12,1,1. Not sure if the 12 might need to be a 14.
The only other thing I'm not sure on is the CC404 zones 5-8 are fixed 24hr zone types so not sure if keyswitch will work on these zones.
E.g. 2:- Using a Zone: Choose any hardwired zone 1-4 can be programmed as a keyswitch. If using zone doubling the other zone on the same terminals must be an E/E zone type. User code 16 is reported.
Zone 1 Location 267: Zone 1: Zone Type: Must be 11 (Keyswitch Zone Type) Location 270: Zone options 1: Must be 8 (momentary Arm / Disarm in away mode). Location 271: Zone options 2: Must be 4 (force arming allowed) Location 272: Report Code: Must be 1 = Send report. (For Pocket secure App) Location 273: Zone Dialler: Must be 1 (primary telephone number)
Zone
Com
+ - Common -ve
Bosch ICP-CC404
3k3
1k5
6k8
Zn1
Zn5
Zones 1 -4
Zone 2 Loc: 274: Zone Type Loc: 277: Zone options 1 Loc: 278: Zone options 2: Loc: 279: Report Code: Loc: 280: Zone Dialler
Zone 3 Loc: 281: Zone Type Loc: 284: Zone options 1 Loc: 285: Zone options 2: Loc: 286: Report Code: Loc: 287: Zone Dialler
Zone 4 Loc: 288: Zone Type Loc: 291: Zone options 1 Loc: 292: Zone options 2: Loc: 293: Report Code: Loc: 294: Zone Dialler
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks