Results 1 to 2 of 2

Thread: DAS DL-150 Remote Arm?

  1. #1
    Junior Member
    Join Date
    Feb 2018
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default DAS DL-150 Remote Arm?

    Hi All

    I'm replacing an old DL-150 with a Hills Reliance R8. I've got most of the cabling identified, except for a blue / white pair which connects to a 2 pin header on the board marked "Remote Arm". The tamper switch of the controller box is in series . The cable pair is part of a 6 wire that goes off to the external horn/strobe (I think). The green/yellow pair of that cable is connected to terminal 1 (marked "Strobe") / common of the DL150 . -Can anyone tell me what I should do with it when trying to hook it up to the new Reliance?


    Thanks a lot

    Pete
    Last edited by big_pierre; 25-05-18 at 10:30 PM.



Look Here ->
  • #2
    Junior Member
    Join Date
    Feb 2018
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Now I've thought about it, I reckon it must be the going to the tamper switch in the external siren. All good!
    Last edited by big_pierre; 26-05-18 at 06:56 AM.

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •