If you have a spare zone input use that and program it for Key switch zone. Type 11
Hey guys, I have a Bosch alarm IPC-CC488 and I want to be able to arm/disarm it via an input(s) located on the motherboard.
I know that the motherboard does not have such inputs but I also know that there is an additional module which connects to the motherboard and that this module has a few inputs which if triggered high can then arm/disarm the alarm.
A while back I did find this module, however I lost my search and now for the love of my life if I can find it again.
Anyone knows this particular module model number?? Thanks.
DM8000 quad tunner 2xDVB-S2 + 2xDVB-T, DM500HD
Look Here -> |
If you have a spare zone input use that and program it for Key switch zone. Type 11
danone (23-07-18)
secure (23-07-18)
It works perfect now! I can arm/disarm using one zone (key switch).
Do you guys know a way to know the alarm status? Basically I need an output (12V or similar).
Hope I make sense, sorry, alarms are not my strongest point.
Thanks in advance!
DM8000 quad tunner 2xDVB-S2 + 2xDVB-T, DM500HD
Bookmarks