-
Junior Member
- Rep Power
- 0
- Reputation
- 30
Electrolux ewf12832 stops during washing
Hi there, am wondering if anyone has a service manual for the Electrolux EWF12832 washing machine. Keeps in stopping during cycles. Did not see much water filling the drum, so tested water inlet valves. Had no resistance on one and excessive in the other. So replaced with new ones. But problem still persists. Where do i go from here?. Appreciate your thoughts.
Cheers.
-
can i have a guess ? there must be some sort of water level sensor. proberly works on water in a tube against air to a low pressure sensitive sw i would guess that the water has come up to high in the tube and is tripping the sw remove the tube blow out and you should be rite but i dont know any thing about washing machines and not qualified to say so but you gotta try dont you good luck don
Junior Member
- Rep Power
- 0
- Reputation
- 30
I don't think it is pump loopyloo. It floods the drum from underneath and pumps out from the tube at the top of the bellows. Although had a water supply issue initially
So replaced inlet water valve. I was thinking pressure switch or maybe even motherboard. 🤔
When it stops, try pressing the door closed to see if the door switch might need adjustment. Just a thought.
Junior Member
- Rep Power
- 0
- Reputation
- 30
Will give it a try, willing to try anything at this stage. Thanks for your input loopyloo. Much appreciated. 👍
Junior Member
- Rep Power
- 0
- Reputation
- 30
Thanks Hinekadon, any advice or ideas are greatly appreciated. I am a mechanic by trade an am not qualified to work on washing machines either. 👍
The Following User Says Thank You to Geronamo30 For This Useful Post:
Junior Member
- Rep Power
- 0
- Reputation
- 30
Was hoping someone had a service manual for this machine. But not looking good at this stage.😕
Jordan's Manuals might be worth contacting.....
For spare parts see .
The Following User Says Thank You to tristen For This Useful Post:
just been talking to a mate who looks after these things he said i am proberly write he thinks its up the top of the machine but he didnt have much time to talk to me
Last edited by hinekadon; 30-07-18 at 11:02 PM.
Reason: spelling
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks