Maybe the system is still trying to route to the 2.4 the side of things?
Reboot the router and connect directly to 5ghz and see how it goes?
I have a Technicolor TG799vac modem and have 2 wireless computers, When both are connected to the 2ghz wireless my network shows both computers and shared folders and drives and all is good, but if I disconnect and reconnect both computers to the 5ghz signal the local network computers go missing, Internet works fine just no local network.
anyone ?
Look Here -> |
Maybe the system is still trying to route to the 2.4 the side of things?
Reboot the router and connect directly to 5ghz and see how it goes?
__________________________________________________ __
Statistically, if you wait long enough, everything will happen!
try turning band steering on and have the same name and password for both 2.4 and 5.....
thats how my Technicolor DJA0230TLS is set up and works fine...
Last edited by hoe; 04-09-18 at 12:44 PM.
Turned out to be one computer on the 5ghz was set to public and one is set to private. the 2ghz connection both were set to public
all good thanks everyone for the quick response
cheers thomo
Bookmarks