Results 1 to 4 of 4

Thread: Bosch D9412GV4 Programing For Network

  1. #1
    Junior Member
    Join Date
    Sep 2018
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Bosch D9412GV4 Programing For Network

    I have 37 D9412GV4 panels that use the dual phone line module and I want to switch the panels to use the B426 Ethernet module as primary doing away with the dual phone line.
    The panels report to a local receiver D6600 and I have installed the ITS-D6686 Ethernet adapter.
    I can connect to the receiver using the D6200 software over the network and I can connect to the panels using RPS over the network but can not get the panels to communicate with the receiver.
    Any thoughts to what I may have wrong.



Look Here ->
  • #2
    Junior Member
    Join Date
    Jan 2008
    Posts
    10
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Rep Power
    0
    Reputation
    15

    Default

    You'll need to setup the client into the D6200 software before the panel will talk to the receiver.

  • #3
    Junior Member
    Join Date
    Sep 2018
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    OK, I purchased the 500 accounts dongle but I still can not get the panel and the receiver to communicate.
    I have added the panel in the account database but still get a Comm Fail RTE #1 on the key pad.
    Any Thoughts.

  • #4
    Junior Member
    Join Date
    Sep 2018
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Well it's always something simple I had the automation IP address set to the PC running the 6200 software corrected that all is good now.

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •