You have two options.
1. A quad output LNB (4 separate outputs on the LNB with two cables each going to the two decoders).
2. If the dish has a dual output LNB (which it should have if your mate already has an iQ box) to connect those two cables into a 2-in/4-out multiswitch then run two cables to each decoder from the multiswitch.
You could use a multiswitch with more outputs than 4 (such as a 2-in/8-out) for extra connections, but you need a multiswitch with a minimum of 4 outputs.
You cannot use splitters.
(I also moved your thread to the correct section)
Bookmarks