My guess would be that you would map the relay on the TS0862 to a number. You can then have the input set to activate this relay when unsealed. I have not used a TS0862 board so not 100% sure on how you map that.
But i did look at Titan and see that you assign "Relay Control Group" to the arming station.
The help file says:
"Relay Control Group"
This record allows you to set a relay control group for an arming station. This relay control group is then used to drive relays on the arming station.
You can use between 1 and 32, so maybe try and put a number in there, then map the relay, then go to -> Control -> Relay -> Select Relay -> Set, and see what happens to the relay. it may / may not activate.
Bookmarks