I think it is only outputs on the B308.
Hey, does anybody know if the RSC+ app can control on-board relay (eg) Output 1, 2 or 3 or does it only let you control outputs from the B308 output module?
thanks
Look Here -> |
I think it is only outputs on the B308.
The RSC+ app can control any of the on-board outputs or any of the B308 outputs (if a B308 module is installed). See page 54 of the installation manual.
secure (18-01-19)
Yeah I've done the outputs on the B308 before no problem. I don't want to buy an output module for what I need now (just 1 x relay) so I was hoping to use the spare smokie one.
But when I goto OUTPUTS on the RSC app, all I get in the menu is ALL - ON - OFF with no relay number to choose from so I'm starting to think it can only be outputs from the B308.
As per Alarmman, can be panel outputs and B308. Depends on how the output is programmed, if it gets listed in the app under outputs.
Exactly what i want to do is control my garage door via the RSC app, no need to use the b803 if there is spare output 2 and 4 spare which should be able to be programmed to perform a different function.
Has anyone done it?
hey guys,
iv got a solution 3000 and iv got my garage door currently hooked up to output 2 using event code 2,13 with my radion remote. i understand i need event 2,8(or 9 and 10) to get the output to work in the RSC+ app but i will loose the ability to use my radion remote to open my garage door, is there a way to have multiple event types on the one output? or do i need to get a B308 and have multiple outputs for my door to make it work?
kind regards
Aaron
Use two outputs and link the wiring to each output then to the device, then can have 2 different event types operate the same device.
Could change outside horn speaker to 12v siren and use int siren and ext siren on the same output freeing up another output possibly. Or change both to horn speakers. Haven't done it so can not confirm.
Assume your not currently using ext siren beeps for arm and disarm via remotes etc.
There is also output 4 default int siren
Last edited by secure; 26-02-19 at 09:12 PM.
Bookmarks