Wanted any old toyota Camry Keys 1998 and the Keyless Fob, doing some experiments, trying programming etc. just for a hobby.
thank you.
Look Here -> |
ol' boy (19-02-19)
yes i bought an old camry a couple of weeks ago, Just trying to get a spare key thats all nothing detrimental !!
Hi to a local in our great city - of Perth!
Gumtree might be worth a try - I remember the car - model well.
A locksmith might be able to tweak something - if you can get a key that is close enough.
Have you tried ebay or Aliexpress for a blank key or fob with chip ?
Usually they are only $20 or so and they are easier enough to program.
DM600 & 85cm Motorised Dish
Onefella (09-04-19)
I have an autel diagnostic computer which will program the keys if you get a blank.
Sent from my CLT-L29 using Tapatalk
David071 (07-04-19),HILLVIEW103 (09-04-19)
HILLVIEW103 (09-04-19),iannic52 (09-04-19)
Yes well i sold the Camry and did well, now i have a 2005 hyundai accent just need a spare remote key for that, checked a few joints out they want upwards of $200 for a remote or around $170 for a basic key
that has a chip that will start the car. checked ali express i can get a remote with transponder for around $40 but still have to get it programmed, on the net it tells you how to programme but does it work ???
My autel will do the hyundai for a carton of beer.....
Sent from my CLT-L29 using Tapatalk
Hoe, you might be getting drunk. Do you need the car, too, or just the key?
I'm out of my mind, but feel free to leave a message...
Need to plug into the obd2 if it can't be programmed via ignition sequence
Sent from my CLT-L29 using Tapatalk
wanna buy a obd2???
HYUNDAI REMOTE CONTROL KEY RE-PROGRAMMING
1. Remove the lower crash panel and locate the Remote control receiver unit.
2. The switch on the side of the unit should be switched to the SET position.
3. Press the Door lock button or unlock button on the Transmitter quickly.
4. Return the switch to OFF position and then test remote control.
Programming remotes on 16 pin OBD Systems
1. Locate the small black box below the steering column for remote func-
tion.
2. Remove the small piece of tape to uncover a hole with a switch inside.
3. With the ignition on, move the switch to the "SET" position.
4. Press the button on ALL remotes needed for the vehicle.
5. Return the switch to the "OFF" position.
6. Switch off the ignition and test all remotes.
Additions: Hyundai Key Remote Control Plip Fob (also known as Zapper) Reprogramming and Programming Free Instructions
Sent from my CLT-L29 using Tapatalk
David071 (10-04-19)
What does this mean Hoe? Mine is a keyless ignition, does that make a difference? (i45 Premium)Additions: Hyundai Key Remote Control Plip Fob (also known as Zapper) Reprogramming and Programming Free Instruction
I'm out of my mind, but feel free to leave a message...
some have to have the remote and the security chip programmed seperately.
Bookmarks