Originally Posted by
Tiny
& some other useful info from the manual from page 16,
6.3 Additional information
Restoring Factory Defaults Resetting to factory defaults can be useful if you have changed some settings and lost some functions. Resetting will restore the decoder back to its original configuration and you will lose all personalized settings. To restore factory defaults: 1. Launch the Main Menu press the “MENU” key. 2. Use the arrow buttons to highlight Settings icon, press “OK”. 3. Navigate to Installation, press “OK”. 4. Enter your Installation PIN 1234 5. Navigate to Factory Reset - Restore Default Settings” press “OK” and select “YES” to start the restore factory settings process.
Smart Card The smart card is paired to this Set Top Box which means that the smart card provided with your Set Top Box cannot be used in any other Set Top Box. Similarly you will not be able to use any other card in your Set Top Box.
Reset Button Reset function is provided by pressing the standby button on the front panel and holding it for 4 seconds. This can be used to reset your Set Top Box in the case of a video freeze for example. The Set Top Box will reboot after a few seconds. The front panel LED’s will light up and a “boot” progress bar is visible on the screen when the decoder reboots.
Bookmarks