Results 1 to 6 of 6

Thread: Tecom V10

  1. #1
    Junior Member
    Join Date
    Jan 2008
    Posts
    203
    Thanks
    42
    Thanked 11 Times in 7 Posts
    Rep Power
    205
    Reputation
    70

    Default Tecom V10

    I have a 4 door intelligent controller i'm trying to setup smart card prox reader to work with it, i have the the cards programme, but i cant get the four door controller to work with them, the prox reader have being setup with the config card



Look Here ->
  • #2
    Banned
    Join Date
    Jan 2008
    Posts
    129
    Thanks
    8
    Thanked 17 Times in 13 Posts
    Rep Power
    0
    Reputation
    260

    Default

    Has been a while since I’ve done one.
    From memory you need to configure the reader as RAS 1 if connecting to 4DC.
    Does the reader show any reaction when you badge the cards?
    Last edited by jrtech; 18-06-19 at 09:29 PM.

  • #3
    Junior Member Poody's Avatar
    Join Date
    Jul 2010
    Location
    Auckland NZ
    Posts
    145
    Thanks
    0
    Thanked 19 Times in 18 Posts
    Rep Power
    179
    Reputation
    380

    Default

    You need to connect them to the sub lan on the Ctlr.
    Make sure that you have a term link resistor fitted across Data + Data - at the reader and have the term link jumper on at the panel.
    In the controller poll the Ras number
    In the door programming the reader type needs to be Tecom ASC
    Add the door to any door groups required.
    Aspire to Inspire Before you Expire!!

  • #4
    Junior Member
    Join Date
    Jan 2008
    Posts
    203
    Thanks
    42
    Thanked 11 Times in 7 Posts
    Rep Power
    205
    Reputation
    70

    Default Tecom V10

    Quote Originally Posted by jrtech View Post
    Has been a while since I’ve done one.
    From memory you need to configure the reader as RAS 1 if connecting to 4DC.
    Does the reader show any reaction when you badge the cards?
    I have poll the ras but I have badge card on reader, doesn’t acknowledge it doesn’t register on the history either

  • #5
    Junior Member Poody's Avatar
    Join Date
    Jul 2010
    Location
    Auckland NZ
    Posts
    145
    Thanks
    0
    Thanked 19 Times in 18 Posts
    Rep Power
    179
    Reputation
    380

    Default

    How have you programmed the reader and the cards?

    Is it a new reader?
    Do you have the TS0870 programming Guide.
    Aspire to Inspire Before you Expire!!

  • #6
    Banned
    Join Date
    Nov 2013
    Posts
    29
    Thanks
    1
    Thanked 4 Times in 4 Posts
    Rep Power
    0
    Reputation
    70

    Default

    Is the 4 door controller a TS0867 or TS0866? Either/Either you will need Firmware Version R110613.801 or greater so maybe check your firmware version.
    Last edited by ozsec; 04-07-19 at 09:37 PM. Reason: added info

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •