Results 1 to 6 of 6

Thread: Tecom V10

  1. #1
    Junior Member
    Join Date
    Jan 2008
    Posts
    200
    Thanks
    42
    Thanked 11 Times in 7 Posts
    Rep Power
    148
    Reputation
    70

    Default Tecom V10

    I have a 4 door intelligent controller i'm trying to setup smart card prox reader to work with it, i have the the cards programme, but i cant get the four door controller to work with them, the prox reader have being setup with the config card



Look Here ->
  • #2
    Junior Member
    Join Date
    Jan 2008
    Posts
    118
    Thanks
    8
    Thanked 15 Times in 11 Posts
    Rep Power
    148
    Reputation
    220

    Default

    Has been a while since Iíve done one.
    From memory you need to configure the reader as RAS 1 if connecting to 4DC.
    Does the reader show any reaction when you badge the cards?
    Last edited by jrtech; 18-06-19 at 09:29 PM.

  • #3
    Junior Member Poody's Avatar
    Join Date
    Jul 2010
    Location
    Auckland NZ
    Posts
    107
    Thanks
    0
    Thanked 15 Times in 14 Posts
    Rep Power
    120
    Reputation
    300

    Default

    You need to connect them to the sub lan on the Ctlr.
    Make sure that you have a term link resistor fitted across Data + Data - at the reader and have the term link jumper on at the panel.
    In the controller poll the Ras number
    In the door programming the reader type needs to be Tecom ASC
    Add the door to any door groups required.
    Without Geometry life is really POINTLESS

  • #4
    Junior Member
    Join Date
    Jan 2008
    Posts
    200
    Thanks
    42
    Thanked 11 Times in 7 Posts
    Rep Power
    148
    Reputation
    70

    Default Tecom V10

    Quote Originally Posted by jrtech View Post
    Has been a while since Iíve done one.
    From memory you need to configure the reader as RAS 1 if connecting to 4DC.
    Does the reader show any reaction when you badge the cards?
    I have poll the ras but I have badge card on reader, doesnít acknowledge it doesnít register on the history either

  • #5
    Junior Member Poody's Avatar
    Join Date
    Jul 2010
    Location
    Auckland NZ
    Posts
    107
    Thanks
    0
    Thanked 15 Times in 14 Posts
    Rep Power
    120
    Reputation
    300

    Default

    How have you programmed the reader and the cards?

    Is it a new reader?
    Do you have the TS0870 programming Guide.
    Without Geometry life is really POINTLESS

  • #6
    Junior Member
    Join Date
    Nov 2013
    Posts
    29
    Thanks
    1
    Thanked 4 Times in 4 Posts
    Rep Power
    71
    Reputation
    70

    Default

    Is the 4 door controller a TS0867 or TS0866? Either/Either you will need Firmware Version R110613.801 or greater so maybe check your firmware version.
    Last edited by ozsec; 04-07-19 at 09:37 PM. Reason: added info

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •