Originally Posted by
vk3eka
Thanks for the reply, I have a dual port C band LNB with both feeds going to the 2x4 multiswitch.
Signal strength on both is around 70% the quality varies between 85% on the living room and less on the bedroom box (except today with the wind blowing....). The SatKing only has signal strength display, the Strong has both. I changed receivers to check the quality of both with no difference in picture quality.
I tried having only one receiver at a time connected to the multiswitch in various of the four positions but with the same result.
One thing I have noticed is that on a Blind Scan is that transponder 3590 shows as horizontal polarisation, not vertical. Seems I may have the LNB wrongly positioned.
I may try connecting the 13V LNB output directly to the bedroom sat receiver and see if that helps.
Many thanks for your help
Peter
Bookmarks