Dads sat box not booting.. Cycling through 4 green LEDs and then red power led. Opened it up and nothing visual burnt out. Also have my brothers box doing same. Anyone had same issue. Have tried bypassing the diseq switch direct to the C band dish but does the same thing. Done a full reset via up and down buttons on boot but not resolved. Have taken video but can't upload here.
Look Here -> |
Try reloading the firmware via the serial port
Could be the loader is still working (LED power up sequence suggests so) ~ from the user manual -->> Please apply software through Loader Menu for boot loop issues - power unit down, press and hold UP directional button on front panel and power unit back on whilst holding this down to get into the Loader Menu ... see:
If that doesn't work, the Loader is broken/corrupt & unit would have to go back to Strong.
HTH
Bookmarks