Sorry, Rhinocerous 3D here. I have tried F360, what problems are you having?
Who uses Fusion 360 ?
I need a little help getting started before I start punching walls.
Last edited by loopyloo; 12-01-20 at 07:41 PM.
Look Here -> |
Sorry, Rhinocerous 3D here. I have tried F360, what problems are you having?
loopyloo (15-02-20)
I use Fusion. What's the problem?
loopyloo (15-02-20)
Crikey, got so busy I forgot about this thread.
Problem I'm having is trying to create toolpath files for my cnc mill.
I don't want to learn much too much about Fusion because it's just way out there ridiculous to grasp what the hell it's doing, and I don't need it to draw my 3d projects but I do need it to create the toolpaths for my files from Autocad.
I've watched quite a few youtube videos mostly from a guy called Lars Christensen but he raves on too much and keeps changing the subject so he misses important details.
Do you think you can help me with this ?
i personally use aspire to creat my tool paths.
if you have designed something with autocad and have saved it as a dxf then
its just a matter of importing it into aspire and then assigning your tool paths.
aspire also allows for tool change settings during the process IE fine detail with say a 1mm round nose
and then a cut with a 6mm flute. It allows for a stop and moves to a designated spot for the tool change and
then pickups from where it needs to without the need for a new z-zero setting being done.
This of course is if you have added the change spot into mach3 for tool change mid cut.
Last edited by fandtm666; 15-02-20 at 10:25 AM.
loopyloo (15-02-20)
Bookmarks