-
Junior Member
- Rep Power
- 0
- Reputation
- 30
LG 60LB7500 LCD TV Service Manual?
Hi All,
Just wondering if anybody has a copy of the LG service manual for the 60LB7500 LCD TV?
I have found 2 LED strips (one on the left side, and one on the right so an A & B) in my TV that are drawing too much current and causing the TV to shut down after it boots up....I have disconnected the 2 faulty LED strips (Removing VC16 & VC9 pins from connector) , and it is working OK, just a slight shadow in 2 areas when a very bright background is displayed....for the most part is it very watchable.
I would like to know the part numbers of the LED strips, and order them before opening up the LCD assembly,and do the changeover all in one hit,so I hoped the manual would tell me the correct part numbers.
Also if anyone knows (or has) some good strips for sale to suit this chassis please let me know. (I'm in Melbourne)
Thanks,
Bruce
Last edited by eecs; 18-04-20 at 05:13 PM.
-
Same as an 65LB7500 by the looks -->
The Following User Says Thank You to wotnot For This Useful Post:
Junior Member
- Rep Power
- 0
- Reputation
- 30
Thanks. That's great help.
I will go searching to figure out what the difference is between R1 & R2 types (hopefully left/right - male/female connectors)
Thanks again,
bruce
Last edited by eecs; 18-04-20 at 05:27 PM.
Reason: spelling
Junior Member
- Rep Power
- 0
- Reputation
- 30
Has anyone changed these LED strips on an LG?
There seems to be a L1 and L2, and a R1 and R2 type. There seems to be 3 of each in one set) Does anybody know the locations of what type goes where? Looking from the front, the locations of the faulty LED strips are below:
-------------------------------------------------------
| FAULTY LED STRIP GOOD LED STRIP |
| GOOD LED STRIP GOOD LED STRIP |
| GOOD LED STRIP GOOD LED STRIP |
| GOOD LED STRIP FAULTY LED STRIP |
| GOOD LED STRIP GOOD LED STRIP |
| GOOD LED STRIP GOOD LED STRIP |
-------------------------------------------------------
Actually part number should be tattooed somewhere on the strips
Junior Member
- Rep Power
- 0
- Reputation
- 30
Thanks,
I understand that they will have the part numbers on the PCB's. As I said in the first post...I have identified the locations of the faulty LED strips, and would like to have the replacement parts in advance, before I open up the LCD module. I don't want to pull the LCD module apart and have it sitting in a very fragile state for a week or more waiting for the parts to arrive, not to mention bits of dust etc on the diffuser sheets. That was why I was asking if anybody had first hand knowledge of the required parts.
Yeah, know where you're coming from ~ just a thought ; have you considered replacing the whole LED strip set? I'd think about it, because if you've had 2 strips fail, it'd be a real pisser to do that particular job, put it all back together, and then 'x' weeks/months later another of the (original) strips fails .. food for thought.
Junior Member
- Rep Power
- 0
- Reputation
- 30
Thanks again. Yes....I've considered it.....just not sure how long shipping from China would take in the current climate. I have not found any new complete sets available in Australia.
edit: that link may be incorrect ; you really need isolate screen type used. That site is useful for identifying how many of each strip type there is in each particular model
Last edited by wotnot; 19-04-20 at 04:35 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks