Results 1 to 6 of 6

Thread: RF3332 Series Key Fob

  1. #1
    Junior Member
    Join Date
    Feb 2008
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default RF3332 Series Key Fob

    Hi all,

    Just wondering if anyone might have, or have access to 1 or 2 of these old remotes that were used on the RF3212 DS304 MHz receivers in Solution 862 etc systems?

    They've been discontinued by Bosch and I've an old system that works quite ok except I lost one remote and the other died.
    Was hoping someone may have one or two laying around from an old system replacement or spares?

    If so, I'd love to hear from you.

    Thanks :-)



Look Here ->
  • #2
    Senior Member secure's Avatar
    Join Date
    Jan 2008
    Location
    W.A
    Posts
    907
    Thanks
    156
    Thanked 146 Times in 133 Posts
    Rep Power
    276
    Reputation
    2409

    Default

    Possibly better to get the new version radio receiver RF3212E (which I think is no longer made) or try the RFRC-STR2 (new model) and remotes with the E on the end. This is the 433MHz

    Very unlikely to get to get 304MHz remotes these days. Even second hand ones have seen better days.

  • #3
    Junior Member
    Join Date
    Feb 2008
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Thumbs up

    Quote Originally Posted by secure View Post
    Possibly better to get the new version radio receiver RF3212E (which I think is no longer made) or try the RFRC-STR2 (new model) and remotes with the E on the end. This is the 433MHz

    Very unlikely to get to get 304MHz remotes these days. Even second hand ones have seen better days.
    Hi Secure

    Thanks for the reply.
    Yes, the 3212E is discontinued also. I hadn't mentioned it in my first post but it's a wireless zone system, so if I replaced the receiver with a Radeon or anything else, i'd have to swap out the 304MHz PIRs and Reeds as well.
    Makes it not worth doing.

    If I cant locate a remote, I'll probably look at connecting a receiver card with remote and switch it through the output relay.

    Was just being a bit hopeful someone may have had one and I could have left the system as it is.

    Thanks again for your reply

  • #4
    Senior Member secure's Avatar
    Join Date
    Jan 2008
    Location
    W.A
    Posts
    907
    Thanks
    156
    Thanked 146 Times in 133 Posts
    Rep Power
    276
    Reputation
    2409

    Default

    Or just use a generic remote kit and do keyswitch zone. If you have a spare hardwired zone.

  • #5
    Junior Member
    Join Date
    Feb 2008
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Hi Secure,

    Yeah, it's seems most likely I'll need to look at doing that. Was worth a shot to see if there were any around.

    Thank you once again for your advice.

    Appreciate it :-)

  • #6
    Senior Member
    fandtm666's Avatar
    Join Date
    Jan 2008
    Posts
    5,502
    Thanks
    244
    Thanked 990 Times in 465 Posts
    Rep Power
    1189
    Reputation
    40447

    Default

    .
    Last edited by fandtm666; 07-05-20 at 09:31 PM.

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •