Download and install the latest version of Titan. It's free no rego required.
Install it over the top of the version you are using. It updates the database.
Make sure that you make a copy of the Titan DB before you do this
There are 2 x versions of USB. On the older panel its Mini and the newer panels are Micro.
You will need to the version of the panel. Menu Installer code / 19 / 11 / 1 You need to know if it is a V10-06-**** or lower than "06" EG 02 or 04
Create a new system in Titan. Under Admin Challenger choose the panel type Challenger 10 or Challenger 10 (pre 10-06)
Plug in your USB cable. You should hear a ding dong sound to say the pc has found the panel.
If not you will need to load the driver.
To find the password (probably default 10 x 0) Installer menu 19/9/2/2 Screen should show Path2 USB installer. Press enter 1 then enter. enter again and it should say YES-Enabled. If not change it to yes using the */menu key press enter until you get to acc code. Should be 0001. press enter again until you get to P/wrd. It is a 10 digit P/wrd
Don't make any other changes.
Panel after 10-04-** have USB on by default.
Bookmarks