I'm trying to pick one of the two Mediastar 5G LNBF to get ready when out tower goes 5G. Also I'm worried about a small dish size as my dish is 2.3M Prime Focus mesh.
Both LNBF's are Mediastar
One is 14 Degrees with NO PLL Untra High Gain Model 5002
OR
This one is 15 Degree but has PLL Ultra High Gain Model 5052
No Doubt the 15 Degree PLL would be better (most say this) but what I'm worrying about is the 2.3M dish and its lower gain and I dont want to use the 15 Degree PLL LNBF if I'm going to lose some transponders (lower gain) because the other is 1K better (if that would make a difference) but has NO PLL.
By the way I never uses a PLL before. Also I dong care about the cable entries as I have the same as the 5002 NOW so the 5052 is better as its 90 degree to the connections and it would be easier under the plastic Cover. Anyhow I'm not worried about the connections, all Im worried about is losing some of my Transponder due to the 5G and the Filtering itself might make the LNBF less effective on a smaller dish.
By the way My main satellite box that controls the Diseqc for all the sats I use is the Ultimo 4K and on some Satellite it hard to get a lock (about 10 to 20 seconds) so that can come in consideration because I think that the PLL could help this but again if the PLL will lose some Transponders I wont get it.
Thanks
What would you do (the Pros and the conns between the two)
Thanks All
Last edited by Mr 672A; 24-05-20 at 12:15 PM.
Look Here -> |
Old Post re-lived.
Anyhow
I bought this, our tower is been done for 5G and waiting to be turned on. got two type, one DRO and one PLL. Yes I need twin output because I have multiswitch on all my dishes
The other link for the DRO is gone as the seller has sold out and taken the link off.
hos here (27-09-20)
Bookmarks