Results 1 to 2 of 2

Thread: Bosch A-Link+ showing output statuses as invalid. Am I doing something wrong?

  1. #1
    Junior Member
    Join Date
    Oct 2019
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default Bosch A-Link+ showing output statuses as invalid. Am I doing something wrong?

    First time setting up a Bosch 3000 (ICP-SOL3-P version 2.0.0).
    I've managed to get a B426-M ethernet card working and have been using it to configure the system via the A-Link+ software.

    On the link screen is says "Solution 3000_V2.00".
    Area 1 status is shown correctly, Area 2 status is shown as invalid (I haven't configured it).
    However I don't see any status information for the outputs 1,2 or 3. Instead I see 4 outputs listed and their status is always Invalid.

    Nothing is physically connected to any of the 3 outputs.
    Do I have to connect a dummy load of some kind so that the alarm panel thinks there is a siren or strobe connected?
    Does the relay output count as the 4th output?

    Thanks

    Mike



Look Here ->
  • #2
    Junior Member
    Join Date
    Jul 2020
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Reputation
    10

    Default

    Hi Mike,

    Did you ever get an answer to this? I have the exact same thing.

    Cheers
    Vijay

    Quote Originally Posted by mb2 View Post
    First time setting up a Bosch 3000 (ICP-SOL3-P version 2.0.0).
    I've managed to get a B426-M ethernet card working and have been using it to configure the system via the A-Link+ software.

    On the link screen is says "Solution 3000_V2.00".
    Area 1 status is shown correctly, Area 2 status is shown as invalid (I haven't configured it).
    However I don't see any status information for the outputs 1,2 or 3. Instead I see 4 outputs listed and their status is always Invalid.

    Nothing is physically connected to any of the 3 outputs.
    Do I have to connect a dummy load of some kind so that the alarm panel thinks there is a siren or strobe connected?
    Does the relay output count as the 4th output?

    Thanks

    Mike

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •