Hi Guys,

After some info regarding a Solution 16 V1.4 panel and using Alink to program it.

I can connect to the panel and make changes in the software but when I go from table view to location view, the data is different to what was programmed via the keypad. e.g location 600 in ALink says User codes 1-16 but in the programming manual location 064 is for user 1 code.

I have updated ALink to the latest version 5.2.4.

The main problem I am having with this is that it is auto arming when it should not be programmed for this at all.

Any help will be greatly appreciated.
Cheers Dean