Originally Posted by
fandtm666
you asked for a kidney shaped table with the only specs being the sheet size you will be using
i sent you a dxf file already with it drawn up so i have drawn it again with the sizes.
as i said a dxf etc is only the outline the rest is done by who ever is cutting because
every machine requires different settings and this is also dependent on the material
being used.
A prime example is i have 2 setups and the cutting file for each is different
one uses the tap file the other uses a txt file. so if you bought the dxf to me
i would need to do the settings for which ever machine i use.
Bookmarks