Was it a follow me phone number or back to a monitoring centre.
If back to a monitoring centre best get a alarm tech to sort programming.
Hope someone can help
I no longer have my Ness alarm system monitored, so I now have the phone line disconnected and the error of a flashing line icon
Is it possible to deactivate the line to get rid of the line icon on the control panel?
thanks for any assistance
Look Here -> |
Was it a follow me phone number or back to a monitoring centre.
If back to a monitoring centre best get a alarm tech to sort programming.
puhleese (14-12-20)
tks for the swift reply. It was programmed back to a monitoring centre. I disconnected the phone line and was able to delete all phone nrs but still have the flashing phone icon.
If I need to get an alarm tech to remove the flashing icon I think I might just continue to tolerate it :-)
Then P86E 1E will disabled dialler. 1 led should be ON if dialler is disabled.
If that doesn't make sense. Then need a alarm tech.
puhleese (15-12-20)
"1 led should be on if dialler is disabled"
Tks, I'm a bit slow but I figured it out. Disabled and all good now thankyou :-)
Bookmarks