Username: Master
Password: 4346
Hi All
I was wondering what the default login for CTPlus software is? Or do i have to do the course to find out
Any help would be appreciated.
Look Here -> |
Username: Master
Password: 4346
In CTPlus software go to status and control and then right click on the panel name then choose diagnostics.
In the Diagnostics window choose Ultrasync. and see if Ultrasync is turned on.
If it is not talking to a monitoring station it will be "Non-provisioned"
If you have no joy PM me and I will send you some Cheat sheets.
Aspire to Inspire Before you Expire!!
If you can get it over wifi, it's probably a port forwarding issue. Try adding your panel to the DMZ on your router and see if it works. If so, you'll need to set up port forwarding rules and then disable DMZ on your router.
Just to clarify - Have you updated the panel firmware to ChallengerPlus? You need that in order to connect to UltraSync.
I used this guide:
Repost...
Bookmarks