Holden dealer, some Mr Mints and workshops now have the equipment to do the job.
Maybe shoot off a pm to intelligeorge, he loves his Holdens.
Hi
I have replaced my key for my car and need to know how to program the controller. Is there a sequence requried to program it, or should I just take to a Holden dealer? Thanks.
Look Here -> |
Holden dealer, some Mr Mints and workshops now have the equipment to do the job.
Maybe shoot off a pm to intelligeorge, he loves his Holdens.
Thanks Godzilla....
Dealer, or most locksmiths these days have the programmer.
you need to take the car with you.
What happens if I press alt + F4?
here give this a try for the vs commodore vr should be the same
assembly the key and fob with the screws and program the fob in the car (insert key, turn to on, wait ten minutes for horn to beep,
turn key off and back on under 5 seconds, wait 10 minutes for two horn beeps, turn key off and on in under 5 seconds, wait 10 minutes for three beeps, turn
key off and then try to start the car. It should). The fob should be programmed. Check your door locks too.
Worked on a 3 button VS remote!
IF IT DONT WORK USE A BIGGER HAMMER
Have VR 2 Button remote now with 5 spare remotes because mr minute couldnt get it right and kept reissuing me with new key.
I have the instructions at home, will post tomorrow,no machine needed, they work, but for now try those above instructions they may work too.
Try to pick up any spares from wreckers as they are real cheap and take a minute to programme
waiting with baited breath statesmanjeff....
I work for holden and if there is a quicker way without tech2 or mdi I would love to know.
What happens if I press alt + F4?
HI,
guys sorry to bother you but i just thought i would ask you after seeing the post about vr key programming ,we have a vr that only had one key and its broke so i went to holden to get code and paid for it then when i took it to get programmed the guy told me it wasnt even on the sheet they gave me and after i went back they said it didnt have a bcm code and they could give me a new key and program it for 250 they just tried ripping us off so i left and went to a locksmith and he charged me 120 and when i tried key it didnt work ,and we have to wait a hour untill the car immobiliser turns off after that just to drive it, so we were wondoring if anyone had instructions on how to get our new key working our selves from inside car, we would be very greatfull as we cant use it like this and no one seems to know how to do it , you would be a legend if you could help we are only new and never posted here before please help if you can we are desperate thanks in advance ,blackcar...
did you try my above post that i posted it works
IF IT DONT WORK USE A BIGGER HAMMER
Bookmarks