Use 12707 H that should be good and strong , my dish is way out of posiition, but did scan in 12447 V but fat load of good that was, its all hevc TV5 loaded though as its NOT hevc
stuff on 12407 v has encrypted allready anyway not that i saw it
Hey all,
Wondering if anyone has been able to lock onto the FNANZ beams from Optus 10? I had a quick play today but couldn't find it from the North East of the North Island.
looking for;
12407V (fta apparently)
12447V (encrypted)
Tried on a 60cm dish and a 75 but have a 100cm dish which I haven't tried yet.
My 100cm currently has Intelsat 19 with Optus D1 to the right, and I think I could add a bracket to the right of D1 for Optus 10. So 3 LNB's in total on that dish. What should my LBF frequency be for Optus 10? I dont really understand that but tried 11300 and most of the other options on the receiver which is DVB-S2 multistream compatible.
Cheers,
dooks
Last edited by dookie; 03-02-21 at 02:03 PM.
Look Here -> |
Use 12707 H that should be good and strong , my dish is way out of posiition, but did scan in 12447 V but fat load of good that was, its all hevc TV5 loaded though as its NOT hevc
stuff on 12407 v has encrypted allready anyway not that i saw it
Thanks mate, I didnt see 12707 H hiding there so I will give it a go to at least align it with Optus 10.
One last question for anyone that might know. Should this LNB work on the likes of Optus D1 and Optus 10?
I'm using that for Intelsat 19, but a straight swap with my Optus D1 LNB didnt work - changed the frequencies to no avail.
According to lyngsat. 12407 & 12447v are on the au/NZ beam yet all can find is 12707h
I will fwd the info to lyngsat for him to fix it.
Bookmarks