Originally Posted by
Mr-Resistance
G'Day all
I recently upgraded a NX system to solution 6000 and all is well apart from the dialler... Telstra SNP said its an "ultra sync" type 3G dialler but ive never come accross one of these before and the guy at the monitoring centre said it didnt need a destination phone number. It was plugged into the NX panels native phone jack, so i naturally just plugged it into the 6000's phone jack only for test alarms not to go through...
Curiosity got the better of me and I fired up the NX and got the config, and the destination phone is "12345678" it has an account code and the format is "1" which is contact ID on the NX's from memory? (feel free to correct me here)
Wondering if the Solution 6000 is compatible with the ultra sync or if i should get a permaconn and let that be the end of it? I havnt tried putting "12345678" in the 6000 as a destination phone number yet, just wanted to go there armed with a bit more info as its a 160km rount trip...
Any info is appreciated.
Bookmarks